Figure 4-9: Wpa-Personal Needed For Connection; Figure 4-10: Wpa2-Personal Needed For Connection; Figure 4-11: Congratulations Screen - Linksys WMP54GX User Manual

Wireless-G PCI Adapter with SRX
WPA-Personal for Connection
WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select one of
these methods. Then enter a passphrase.
Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down
menu.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
The longer and more complex your Passphrase is, the more secure your network will be.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
WPA2 - Personal Needed for Connection
AES is automatically used as the encryption method. Enter a passphrase on this screen.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
The longer and more complex your Passphrase is, the more secure your network will be.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
2. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect
to Network to connect to your network.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to "Chapter 5: Using the Wireless Network Monitor."
Chapter 4: Setting Up and Connecting the Wireless-G PCI Adapter with SRX
Setting Up the Adapter
Congratulations! Setup is complete.

Figure 4-9: WPA-Personal Needed for Connection

Figure 4-10: WPA2-Personal Needed for Connection

Figure 4-11: Congratulations Screen

10