1. Manuals
  2. Brands
  3. Avenview Manuals
  4. Network Router
  5. CTRLPRO-VWIP
  6. User manual

Avenview CTRLPRO-VWIP User Manual

Ip controller for hdm-c6vwip-set and 3rd party controllers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AV Connectivity, Distribution And Beyond...
IP Controller for HDM-C6VWIP-SET
AND 3RD PARTY CONTROLLERS
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: CTRLPRO-VWIP
WIRELESS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTRLPRO-VWIP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Avenview CTRLPRO-VWIP

  • Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
  • Page 2 Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...

  • Page 3: Table Of Contents

    2.4 PANEL DESCRIPTION ............................6 2.4.1 Front Panel (CTRLPRO-VWIP) .........................6 2.4.2 Rear Panel (CTRLPRO-VWIP) ........................6 3. INSTALLATION (CTRLPRO-VWIP) ....................3.1 ACCESSING THE CTRLPRO-VWIP WEB INTERFACE..................7 BASIC OPERATION ..........................4.1 Matrix Switching Command ..................................9 4.2 TX/RX Settings .......................................10 4.3 IP Setup ...........................................10 4.4 Alias ..........................................10...

  • Page 4: Getting Started

    • Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The Avenview CTRLPRO-VWIP, IP Controller function has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the CTRLPRO-VWIP should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

  • Page 5: Regulatory Notices Federation Communications Comission (Fcc)

    DO NOT TAMPER WITH THE UNIT. DOING SO WIll VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE If RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page 2...

  • Page 6: Introduction

    Telnet and RS-232 commands to automate high definition video and high quality audio to many screens. This device can be accessed from a WEB Browser and allow control commands to Avenview Video IP solution allowing connection by the following:-Point to Multi- Point with CAT5/6 requires a Managed/Unmanaged Network Switch (Cisco SG300 &...

  • Page 7: Package Contents

    PACKAGE CONTENTS Before you start the installation of the HDMI Extender, please check the package contents. CTRLPRO-VWIP POWER ADAPTER (5V DC 2A) 5.5mm SERIAL PORT CABLE USER MANUAL BEFORE INSTALLATION • Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components within the casing.

  • Page 8: Application Diagram

    APPLICATION DIAGRAM Page 5 www.avenview.com...

  • Page 9: Panel Description

    PANEL DESCRIPTION 2.4.1 FRONT PANEL (CTRLPRO-VWIP) POWER: Red LED when device is powered on ACTIVITY: BLUE LED: Device working properly RED LED: Device is rebooting IP ADDRES LABEL: Insert label here to identify unit IP RESET: Reset device to factory default address.

  • Page 10: Installation (Ctrlpro-Vwip)

    Firefox, Opera, Safari, Internet Explorer 11 or Chrome. Attention The default IP address of the CTRLPRO-VWIP is 192.168.11.243. To connect you must have a network configured that allows this subnet or must set your PC to a 192.168.11.xxx address to connect. The IP address of the IP Control Box can be changed through the System Settings page.
  • Page 11 NOTE If you receive a ‘server unavailable’ system message after entering this address into your browser, ensure your PC is on the same subnet as the CTRLPRO-VWIP box by following these steps: Highlight Internet Protocol Check Use the following IP...

  • Page 12: Basic Operation

    A red bar denotes TX/RX connection is being processed A clear bar signifies corresponding TX and RX are not connected. Click to connect. To remove unwanted TX or RX units from the matrix the CTRLPRO-VWIP must be factory reset. www.avenview.com Page 9...

  • Page 13: Tx/Rx Settings

    Rename TX/RX alias for easier identification and use from API commands Note: Alias cannot contain any of the following symbols or combinations of letters/numbers: ‘,’ ‘;’ ‘_’ ‘@’, ‘*’, ‘&’, ‘EX131’, ‘EX363’, ‘EX373’, ‘EX383’, ‘EX393’, ‘TX’, ‘EX141’, ‘EX403’, ‘RX’ Page 10 www.avenview.com...

  • Page 14: Commands

    4.7 IP Setup (TX and RX Communication) GUI Element Description IP Address IP address for TX and RX communication Subnet Mask Subnet mask for TX and RX communication Default Gateway Default gateway for TX and RX communication 4.8 IP Setup (Telnet/Browser communication) Page 11 www.avenview.com...

  • Page 15: Web Password

    Default password “admin” can be used to restore to factory settings if the user password is unknown 4.10 Debug Log NOTE: Debug files can only be used with the guidance of AVENVIEW support. 4.11 Commands GUI Element Description Factory Default...

  • Page 16: Customising The Ui

    CUSTOMISING THE UI The CTRLPRO-VWIP web interface supports the creation of custom banners, page names & icons to be added to specific pages. To customise the UI, enter http://IPaddress/custom into a browser to display the page below. Click the Browse button in the Banner column to change the main banner (marked in red box below).
  • Page 17 The Telnet protocol can be used to send configuration settings, matrix switching and video wall commands to the CTRLPRO-VWIP system. Commands can only be issued to the CTRLPRO-VWIP by IP using port 23. The default IP address of the CTRLPRO-VWIP is 192.168.11.243 – in default configuration commands should be sent to this IP address. Matrix Switching Control Command Matrix set TX1 RX1 RX2, TX2 RX3 RX4,...
  • Page 18 8 pixels right, whilst over-scaling by 3 rows and 3 columns and setting the tearing delay to 12500 µs. Command vw get Return video wall information: vw- name1 TX1 row-number1 RX11 RX12.. row-number2 RX21RX22 … ... vw-name2 TX2 row-number1 RX11 RX12… ... Note Obtain video wall information and feedback video wall configurations. www.avenview.com Page 16...
  • Page 19 Return videowall2 reset tx Note Remove the video wall configuration of this tx and display a complete picture. (If this tx is in video wall mode, it will only display part of the picture.) www.avenview.com Page 17...
  • Page 20 8 pixels right, whilst over-scaling by 3 rows and 3 columns and setting the tearing delay to 12500 µs. Command vw2 get Return videowall2 information is: vw-name1 row-number1 TX1 RX11 RX12 ... row-number2 TX2 RX21 RX22 ..vw-name2 row-number1 TX3 RX11 RX12 ... Note Obtain video wall information from IP Control Box. www.avenview.com Page 18...
  • Page 21 Return Reply: the device process the command feedback Note Third-party controller or web ui pass through message-body to RX/TX. Notification commands send by the CTRLPRO-VWIP Notification of. Command Return notify endpoint {+ | -} tx/rx tx/rx {- | +} tx/rx tx/rx ...

  • Page 22: Installation Reference Log

    INSTALLATION REFERENCE LOG HDM-C6VWIP-S IP ADDRESS ALIAS ADDITIONAL INFO www.avenview.com Page 20...
  • Page 23 HDM-C6VWIP-R IP ADDRESS ALIAS ADDITIONAL INFO www.avenview.com Page 21...
  • Page 24 PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
  • Page 25 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.

Table of Contents