The Game Adapter's Side Panel; Figure 3-2: Side Panel - Linksys WGA54AG User Manual

Wireless A/G Game Adapter

The Game Adapter's Side Panel

The Game Adapter's mode switch, Reset button, and ports are located on the side panel of the Game Adapter.
Switch The switch is used to set the Game Adapter's mode. If you will run the Setup Wizard or connect the
Game Adapter directly to your Xbox, then set the switch to the Infra position. If you will follow the
"Fast Setup" instructions, then set the switch to the Adhoc A position for Wireless-A (5GHz,
802.11a) networking, or set the switch to the Adhoc B position for Wireless-G (2.4GHz, 802.11g) or
Wireless-B (2.4GHz, 802.11b) networking.
Reset The Reset button is used to reset the Game Adapter to its factory default settings. To restore the
factory defaults, press this button for approximately five seconds.
Network The Network port is where you will connect the Ethernet network cable to your computer for setup
or your game console for gaming.
Power The Power port is where you will connect the included power adapter.
Chapter 3: Getting to Know the Wireless A/G Game Adapter
The Game Adapter's Side Panel

Figure 3-2: Side Panel

7