Limited Warranty LISTEN, Inc., a Massachusetts Corporation, having its principal place of business at 580 Harrison Ave, Suite 3W, Boston, MA 02118 ("Manufacturer") warrants its AudioConnect 4x4 products (the "Products") as follows: 1. Limited Warranty. Manufacturer warrants that the Products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase.
Text in quotation marks indicates a parameter selection value or menu option (i.e. “EXT”). Phrases, such as: Start > Programs > Listen, Inc. use the greater than symbol (“>”) to indicate multiple menu options or mouse selections within a software control context.
The acceptable voltage range of the AudioConnect 4x4 is printed on the label affixed to the top cover of the AudioConnect 4x4 just above the AC power inlet. Failure to connect the AudioConnect 4x4 to an AC power source that conforms to the requirements printed on the label may damage the AudioConnect 4x4 and require it to be returned to the factory for non-warranty repair.
The AudioConnect 4x4 supports AES/EBU for the digital inputs and outputs, and can be used with any AES/EBU device that supports standard sample rates between 44.1kHz and 192 kHz.
Hardware Setup in SoundCheck SoundCheck Hardware Editor Driver - ASIO Device Name - ASIO AudioConnect 4x4 Select Ch - Analog 1-4 or Digital 1-4 Digital Channels are routed to the AES I/O channels 1-4 (see Figure 3-1) Latency - 5145 (this depends on the sample rate selected, 44.1kHz, as well as USB...
Page 12
Status Confirms the connected device and serial number Shows the Current Sample Rate The sample rate of AudioConnect 4x4 will automatically update to the rate set in the SoundCheck Hardware Editor (see Figure 3-1).
LSLOT USB EXPANSION PORT Port for installation of LSlot USB card which is used to connect AudioConnect 4x4 to the SoundCheck computer USB port. WORD CLOCK IN and WORD CLOCK OUT BNC connectors WORD CLOCK OUT - Allows external devices to synchronize to the AudioConnect 4x4 sample clock generator.
115, 230 and 100 VAC. The acceptable voltage range of the AudioConnect 4x4 is printed on the label affixed to the top cover of the AudioConnect 4x4 just above the AC power inlet. Failure to connect the AudioConnect 4x4 to an AC power source that conforms to the requirements printed on the label may damage the AudioConnect 4x4 and require it to be returned to the factory for non-warranty repair.
GND: 10, 12, 13, 22, 23, 24, 25 (Any of these can be used as ground.) Unused Pins: 3, 4, 7 to 9, 11, 16, 17, 20 to 22 Note: Only Digital channels 1 - 4 are available. AudioConnect 4x4 Manual Operation...
AudioConnect 4x4 is set to be clock master, thereby slaving all other devices to the AudioConnect 4x4. It is important that only a single device act as clock master, to prevent the occurrence of audible digital errors.
Connection Diagram The figure below shows only one of the many possible configurations using AudioConnect 4x4. AudioConnect 4x4 Manual Connection Diagram...
AC Outlet? Check the label by the AC adapter on the back of the AudioConnect 4x4 to insure that you are using the correct version for your electrical system. The AudioConnect 4x4 is available in 100V, 115V and 230V configurations.
Return Policy If you have a unit that you suspect is defective or is malfunctioning contact Listen, Inc. technical support via one of the means described above for diagnosis. If the technician determines that the unit is faulty, they will issue an RMA number so you can send the unit in for repair.
FCC Declaration of Conformity CE EMC Declaration of Conformity EMC Certifications FCC DECLARATION OF CONFORMITY CE EMC DECLARATION OF CONFORMITY AudioConnect 4x4 Manual EMC Certifications...
Need help?
Do you have a question about the AudioConnect 4x4 and is the answer not in the manual?
Questions and answers