Linksys EFG80 User Manual page 10

IP Address. Set the Instant GigaDrive's IP Address here, making sure that
it is on the same LAN segment as the PC running the Setup Wizard.
Subnet Mask. The Subnet Mask must match the other devices on your
network. It is set by default to 255.255.255.0.
Default Gateway. The value is left blank by default. If you have a router on
your network, however, enter its IP Address here.
6. From the next screen, shown in Figure 4-7, you can set the Instant
GigaDrive™ as your network's DHCP server if no other device is function-
ing as a DHCP server on your network. If you wish to use the Instant
GigaDrive™ as a DHCP server, click the box next to Enable DHCP
Server. Then, enter the range of IP Addresses you want to assign on your
network. The first three Start and Finish fields must match the Instant
GigaDrive's IP Address with the final fields ranging from 2 to 250.
Click the Next button on the right to proceed or the Back button to return
to the previous screen.
13
Instant GigaDrive
Figure 4-6
Series EtherFast
TM ®
7. From the next screen, Figure 4-8, you can change the time and date on the
Instant GigaDrive™.
Network Attached Storage
Figure 4-7
Figure 4-8
14