Installing A New Or Recharged Battery Pack - Symbol PDT 6100 Series Product Reference Manual

PDT 6100 Product Reference Guide

Installing a New or Recharged Battery Pack

To install a new or recharged NiMH battery:
1. Turn the battery pack latch counterclockwise and remove the battery compartment
door.
Figure 6-1. Removing the Battery Compartment Door
2. Lift the battery pack out.
3. Slide a NiMH battery pack in the compartment, with the contacts facing inside the
compartment and the tab facing the top of the compartment
6-4
Contacts
Figure 6-2. Inserting the NiMH Battery Pack
Tab
(Figure 6-2).