Advertisement
Quick Links
i-TECH135
Inverter Arc
Welding Machine
User Manual
Do not attempt to set up or operate this equipment until you have read & fully
understood the contents of this manual. If you do not fully understand any of the
instructions, please contact your supplier for further information & advice before
beginning any welding procedure.
Advertisement
Summary of Contents for iFL i-TECH135
-
Page 1: Welding Machine
Inverter Arc Welding Machine User Manual Do not attempt to set up or operate this equipment until you have read & fully understood the contents of this manual. If you do not fully understand any of the instructions, please contact your supplier for further information & advice before... - Page 2 2. Improper use, abuse or any attempt to repair the product by an unauthorised third party will invalidate any warranty claim. 3. Any parts or consumables fitted or used in conjunction with the i-TECH135 which affect the equipment operation & which are deemed by Inverter Fusion Ltd to be of inferior quality or not fit for that purpose will be regarded as abuse and will invalidate the warranty claim.
-
Page 3: Operating Instructions
— pacemaker users should consult a doctor before welding. Set Up & Working Environment 1. The i-TECH135 welder should be operated from a 240v power input. 2. If you are using a generator, ensure it is powerful enough to operate the machine. -
Page 4: Troubleshooting
Troubleshooting Fault Cause Remedy Ensure that the machine is connected No mains power to a suitable live mains power source available The power on & is switched on. LED is not lit The fuse in the plug is Replace the fuse. no longer working Stop welding for a while to allow the The machine has...
Need help?
Do you have a question about the i-TECH135 and is the answer not in the manual?
Questions and answers