Advertisement
Quick Links
Water Rider 4
PART #: F-WX4S
330 LB. [150 kg]
MAXIMUM WEIGHT CAPACITY
MANDATORY – LEAVE THIS MANUAL
WITH THE BIKE OWNER
• To assemble your equipment read entire manual and follow all instructions.
• Consult your doctor before beginning any sports or exercise program. Patients with
hypertension use extreme caution and consult your doctor prior to using this equipment.
• It is important to stretch and warm up prior to using this equipment.
• Check contents of all packages against the parts diagrams and report any damaged and/or
missing parts immediately.
• This device is designed for individual, adult use only. Children using this device should be
supervised.
• This product is to be used in a pool environment where the pH level of the water is maintained
between 6.7ppm and 7.6ppm.
9889 Garrymore Ln
Missoula, MT 59808
SAVE a copy of these instructions
888-687-3552 | +1-406-549-0769
aquacreek.com
1
Copyright © 2015 Aqua Creek Products All Rights Reserved
Revised 5/1/2015
Advertisement
Related Manuals for Aqua Creek Water Rider 4
Summary of Contents for Aqua Creek Water Rider 4
- Page 1 • This product is to be used in a pool environment where the pH level of the water is maintained between 6.7ppm and 7.6ppm. 9889 Garrymore Ln Missoula, MT 59808 SAVE a copy of these instructions 888-687-3552 | +1-406-549-0769 aquacreek.com Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015...
- Page 2 Water Rider 4 Pool Bike PAGE DESCRIPTION EXPLODED VIEW TOOLS PARTS LIST INSTALLATION USING THE BIKE MAINTENANCE WARRANTY Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015...
-
Page 3: Exploded View
Exploded View Tools • Note: The use of these tools is reserved for the assembly of the pool bike • Warning: Keep tools out of reach of children Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015... -
Page 4: Parts List
COVER PEDAL (A-B) CRANK LOCKNUT (A-B) SEAT SPILE SEAT BOLT M6X30MM STATOR BEHIND TUBE SEAT TUBE LOCK NUT M8 WASHER ø 8 WASHER ø 6 BOLT M6X10MM PROTECTIVE COVER Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015... -
Page 5: Installation
(#6). Step 4: Install the seat tube (#17) and handlebar tube (#13) into the main frame (#7) and then adjust their position using the ‘click-and-turn’ handles (#9). Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015... - Page 6 (#16). Step 8: Install the cover (#14) onto the main frame (#7). Secure it in place with the bolts and washers (#25 & #26). Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015...
- Page 7 Repeat the movements performed during the warm up without traumatizing your muscles. Be sure to reduce speed and resistance during this phase. Once you have gained experience, increase the duration and intensity of your regular workout. Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015...
- Page 8 7. If there are lime-scale deposits or stains, they can be removed with a polishing cleaner for stainless steel and a non-abrasive soft cloth. Then wash the bike with clean water and dry it completely. Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 5/1/2015...
- Page 9 Creek may void warranty. To initiate a warranty claim, the owner of an Aqua Creek product must provide the place of purchase, in writing, with a full description of the product, its serial number, the dates of purchase and installation, and the exact nature of the defect. Within thirty (30) days after receipt of a written warranty claim by Aqua Creek, and barring any unforeseen delays, the place of purchase will be notified of Aqua Creek’s decision regarding the claim.
Need help?
Do you have a question about the Water Rider 4 and is the answer not in the manual?
Questions and answers