Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
NOTICE
CLEAN IMMEDIATELY
Clean the Spray Gun IMMEDIATELY
after EVERY use, in between coats,
and when it will be idle for
more than 5 minutes.
Delayed or inadequate cleaning will
permanently clog the Spray Gun.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15g
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CentralPneumatic 62381
Summary of Contents for CentralPneumatic 62381
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Cluttered benches and dark areas increase the while operating the tool. Distractions are risks of electric shock, fire, and injury to persons. able to result in the loss of control of the tool. For technical questions, please call 1-888-866-5797. Page 2 Item 62381... -
Page 3: Personal Safety
Use only lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. b. When servicing a tool, use only identical replacement parts. Use only authorized parts. For technical questions, please call 1-888-866-5797. Item 62381 Page 3... -
Page 4: Air Source
Wear NIOSH-approved respirator. at standard conditions WARNING marking concerning National pipe thread, tapered Risk of Explosion. National pipe thread, straight WARNING marking concerning Risk of Fire. Do not use solvents improperly. For technical questions, please call 1-888-866-5797. Page 4 Item 62381... -
Page 5: Specifications
Air Pressure Range 15 – 45 PSI Air Consumption 12 CFM @ 45 PSI Maximum Air Pressure 45 PSI Cup Capacity 20 FL. OZ. Air Inlet 1/4 IN. – 18 NPS For technical questions, please call 1-888-866-5797. Item 62381 Page 5... -
Page 6: Setup
However, it is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the tool is disconnected and unpowered. For technical questions, please call 1-888-866-5797. Page 6 Item 62381... - Page 7 NOTICE Clean the Spray Gun IMMEDIATELY after EVERY use. Delayed or inadequate cleaning will permanently clog the Spray Gun. Latex paint hardens quickly and permanently inside Spray Gun. For technical questions, please call 1-888-866-5797. Item 62381 Page 7...
- Page 8 NOTICE Clean the Spray Gun IMMEDIATELY after EVERY use. Delayed or inadequate cleaning will permanently clog the Spray Gun. Latex paint hardens quickly and permanently inside Spray Gun. For technical questions, please call 1-888-866-5797. Page 8 Item 62381...
-
Page 9: Operation
3. Before spraying, mask nearby objects not being sprayed and lay cloths (not included) on the floors. pattern Nozzle Adjustment Knob Trigger Air Knob Regulator pressure Gauge Figure C: Components and Controls For technical questions, please call 1-888-866-5797. Item 62381 Page 9... - Page 10 Primer Sealing Coats and Urethane Latex Paint Heavy Latex Paint, High Build Primer 1.8-2.5 Glue Very Heavy Gel Coat, Industrial Glue 2.0-3.6 Note: Chart provided for reference only. Additional fluid tips sizes not included. For technical questions, please call 1-888-866-5797. Page 10 Item 62381...
- Page 11 Thin CAUTIOUSLY. Proceed slowly, adding minimal amounts at a time. DO NOT exceed the manufacturer’s thinning recommendations. Figure H 10. Release the trigger. 11. Tighten Collar on Fluid Knob to lock fluid adjustment settings. For technical questions, please call 1-888-866-5797. Item 62381 Page 11...
- Page 12 Adjustment 15. Use the Pattern Knob to adjust the spray pattern. Figure L: Fan Direction 17. After the adjustment, tighten the Lock Ring by hand. Figure J: pattern Knob For technical questions, please call 1-888-866-5797. Page 12 Item 62381...
-
Page 13: Spraying Technique
7. Clean the Spray Gun IMMEDIATELY after EVERY use, in between coats, and when Figure N: Spray Gun Angle - side view it will be idle for more than 5 minutes. For technical questions, please call 1-888-866-5797. Item 62381 Page 13... - Page 14 8. Make sure all parts are free from residual paint. Figure p Spent Solvent Disposal After cleaning, dispose of spent solvent according to the solvent manufacturer’s directions and local hazardous waste standards. For technical questions, please call 1-888-866-5797. Page 14 Item 62381...
-
Page 15: Maintenance
• any other condition that may affect its safe operation. Air Supply Maintenance Every day, perform maintenance on the air supply according to the component manufacturers’ instructions. Storage Store in a dry, secure area out of reach of children. For technical questions, please call 1-888-866-5797. Item 62381 Page 15... - Page 16 Fluttering Spray 4. Dry or loose Fluid 4. Lubricate or tighten Packing Nut. Needle Packing Nut. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. For technical questions, please call 1-888-866-5797. Page 16 Item 62381...
- Page 17 4. Replace Air Valve assembly. 5. Bent Air Valve Stem. 5. Replace Air Valve Stem. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. For technical questions, please call 1-888-866-5797. Item 62381 Page 17...
-
Page 18: Parts List And Diagram
Air Valve Body Connector Washer Filter Spring Washer Cup Cover Spring Ventilator Head O-ring Tool Wrench Air Nut Brush Air Knob Air Regulator Air Valve Air Pressure Gauge *Item not shown. For technical questions, please call 1-888-866-5797. Page 18 Item 62381... -
Page 19: Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Item 62381 Page 19... -
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 62381 and is the answer not in the manual?
Questions and answers