Advertisement

Quick Links

Thankyou for choosing the MotoRader 1R Intercom System
From now on, you can talk with your motorcyclist friends by way of this
new two way wireless Bluetooth communication system, or you can chat
with your pillion.
Maybe receive a cellphone call without pressing a button, You can enjoy
your favorite stereo music from your A2DP enabled cell phone or MP3
player or perhaps listen to the audio navigation message from your
bluetooth enabled GPS.
With this New Super-Range Bluetooth, you can do all these things even
if you are riding or snow skiing !!!
All this hands free functionality is contained within one self contained
module that attaches to the side of your helmet .
Main Features:
Maximum talking range
communication by bluetooth system
Up to
120Km/h
working speed
Up to
7 hours
talking time
Safe
auto-receiving
Advanced
A2DP & EDR
Stereo music/audio
Line in
audio jack ,wired connect with any audio device which with 3.5 mm plug
Wind noise DSP cancellation
Water-resistance, all weather
Friendly for gloves
-------------------------------------------- 1 -----------------------------------------

User Manual

500
meters between two riders, real two-way wireless
cell phone calls
bluetooth profile
function(transmits from A2DP enabled cellphone/MP3/GPS)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1R and is the answer not in the manual?

Questions and answers

Summary of Contents for MOTORader 1R

  • Page 1: User Manual

    User Manual Thankyou for choosing the MotoRader 1R Intercom System From now on, you can talk with your motorcyclist friends by way of this new two way wireless Bluetooth communication system, or you can chat with your pillion. Maybe receive a cellphone call without pressing a button, You can enjoy...
  • Page 2 Read the manual carefully before operating the system , and operate the headset strictly according to the manual, otherwise performance might not be optimum Contents 1.Contents ………………………………………….page 2 2.Introdution ……………………………………….page 2-3 3.Components of retail box ………………………..page 4-6 4.Operation: ………………………………………..page 6-14 Introdution: -------------------------------------------- 2 -----------------------------------------...
  • Page 3 We will describe this communications kit as B(Bluetooth headset) I (intercom) M (music) This BIM can either be used for rider or for pillion. This BIM can connect with four bluetooth devices: a bluetooth enabled cellphone, two BIM(two riders or one rider and one pillion), an audio source which with a built in or a external audio bluetooth transmitter.
  • Page 4 1. Components of retail box Component Parts Number BIM headset main part BIM -001 Clip for mounting the main unit BIM -002 Speakers & microphone & audio plug BIM -003 AC &USB Charger (AC110V-220V / DC OUTPUT 5V) BIM -004 2.5mm to 3.5mm audio adapter cable BIM -005 User manual...
  • Page 5 Clip&hanging-hole for mounting the main BIM unit Clip/Inserted plate/Spacer Clip with sticker for option Speakers/Boom Microphone/audio plug -------------------------------------------- 5 ----------------------------------------- The AC & USB Charger...
  • Page 6 Note: Different country may has different adaptor Before using: Charging the BIM Before using this device, Please charge the BIM main device at least three hours. We have provided you with the ability to charge the system via the USB port of your computer or if you are away on a trip, you can use the supplied Multi-voltage USB power adapter .
  • Page 7 1) find a best position on the left side of your helmet to put the clip 2) Insert the inserted plate between shell and foam of the helmet Fix the clip on the helmet with the screws 3) hang the main unit of the BIM on the clip Clip Inserted plate for clip Spacer...
  • Page 8 clip with sticker Front Back Attaching the two speakers and the microphone . The success of the system depends on the careful positioning of the earspeakers directly over top of the ear canals. this will give the best signal to noise of the received audio..
  • Page 9: Operation

    mouth with the foam just touching your lips , the visor should cover the microphone effectively! (Minimizes wind noise contribution ) Correct position of the microphone Wrong position of the microphone 3) Plug in the positioned headset to the communications module and attach it to the side of the helmet .
  • Page 10 2) You must place the BIM in “Pairing mode”, this is done by way of a holding down the Power/Interphone key on the headset, until the red & blue LED flash alternately. 3) Begin the “searching for Bluetooth device” on the cell phone according to the phone’s instructions 4) when the BIM is discovered, the cell phone will display MOTOR PHONE select this and accept the connection...
  • Page 11: Interphone Function

    will terminate the call. 3) Reject a cellphone call When income a cell phone call, you will hear the ring, within 1 second immediately press the Phone/Play key about 2 seconds, it will reject the call. 4) Make a cellphone call Dial a number on your phone as normal, ( but don’t do this if you are on road for your safety) the sound will be automatically heard in your...
  • Page 12 1) Listen to stereo music from your A2DP enabled cell phone Read the user manual of your cell phone carefully, if your cell phone is A2DP enabled, the BIM can receive the stereo music from the cellphone. Please note that only A2DP(stereo bluetooth) enabled cell phone can offer bluetooth music transmitting service.
  • Page 13 the way is same to listening to music from a MP3. 5) listen to stereo music from MP3 which with a built in bluetooth transmitter please familiarize yourself with Bluetooth function of your Bluetooth enabled MP3(this MP3 must has Bluetooth transmitting function). read the instruction manual that came with the MP3 so you can enable its bluetooth function.
  • Page 14: Not Working

    Note: it might need about 5 seconds to auto-return to “intercom talking” state after the “cell phone talking” has been hung up. troubleshooting : 1. not working Could be a flat battery charge the BIM 3 hours. 2. Reset 3. In some regions of high RF strength ie near high power TV transmitters ,GSM station or airport radars, these can overwhelm the CPU in the BIM causing it to latch up.
  • Page 15 OTHER FEATURES ·Digital Signal Processor (DSP) Technology for wind noise cancellation ·Excellent performance at speeds up to the legal limit with a full face helmet ·Easily mounts to all full face and open face helmets GENERAL FEATURE ·Up to 7 hours talk time when connected to your cell phone ·UP to 7 hours time when listening to music ·...

Table of Contents