Advertisement
Nose trimmer
Please carefully read the instructions for use below before
using the appliance.
ProdUCt FeatUres
1. to install the battery:
Open the battery compartment located on the back of the trimmer
at the bottom. Slide the cover toward the end.
Insert one AA 1.5V battery as indicated on the inside of the
compartment. To replace the cover, line up the slots and slide it up
until it 'clicks' into place. Using alkaline batteries ensures better
performance and a longer life for the appliance.
Remove the battery from the appliance if you will not be using it
for long periods or if the battery is dead. This will help extend the
life of the appliance.
2. to turn on:
Once the battery is in place, pull the protective cap off and turn the
trimmer on by pushing the ON/OFF switch up into the ON position.
to eliminate undesirable nose and ear hairs
Gently insert trimmer head into the ear or nose and cut the hairs.
Advertisement
