Temperature Readings; Switch Between In/Out Temperatures; Indoor Humidity Readings; To View Minimum/Maximum Records - Taylor WeatherGuide Instruction Manual

How to read your WeatherGuide™
To Switch Between Indoor and Outdoor Temperature
Displays

Indoor Humidity Readings

To View Minimum/Maximum temperature/indoor hu-
midity records

Temperature Readings

Temperatures display on the top line of the LCD.
Indoor temperature readings – these are temperatures at the
thermometer's location.
Outdoor temperature readings – these are temperatures that can
be measured by the attached sensor probe. Open a window and run
the cable through the opening so that the sensor probe is exposed to
the outdoor temperature. Gently close the window to avoid crimping
or severing the cable.
Alternately, the probe may be used to measure temperatures of aquar-
iums, swimming pools, hot tubs, etc. Simply allow the end of the probe
4
to hang where you wish to measure temperatures.
Press the "IN/OUT" button located on the back of the unit to switch
between indoor and outdoor temperature displays.
An "IN" icon appears when indoor temperature is on the screen.
An "OUT" icon appears when outdoor temperature is on the screen.
Indoor humidity displays on the bottom line of the LCD.
Your WeatherGuide™ will store the last recorded high and low tem-
peratures over a 24 hour period.The 24 hour period starts when bat-
teries are installed.
Press the "Min/Max" button located on the back of the unit to view
minimum and maximum records.