Advertisement
Rollover Mode Switch
Press Nkey (Lightning key), the Nkey LED will be flashing till stop. It means the keyboard is switching the
rollover mode. Nkey LED is on for N-key rollover mode. Nkey LED is off for 6-key rollover mode.
Backlight Mode Switch
Press Fn + Nkey (Lightning key) to circulate different backlight modes: Individual Dimming
Ripple Explosion
Breathing
→
+
to adjust brightness. There are 7 levels of brightness.
↑
Restore to factory default
Press and hold Fn + R, Toggle LED is flashing after 3 sec. Continue to hold Fn + R until the Toggle LED flashes
for 9 times will restore to factory default
F1
F2
F3
F4
F5
F6
F7
Fn
+
F8
Pn
Rollover
↑
↓
Ins
Home
PgUp
All LED off
All LED on. Under All LED on mode, you can press Fn +
→
→
Fn General keys
=
Enter/Exit Programming Mode
Switch Backlight Mode
Increase Brightness
Decrease Britghtness
Mute
Volume Down
Volume Up
Play/Pause
Previous Track
Next Track
Calculator
Lock Win key
Delay 15ms
Delay 0.1s
Delay 0.5s
Laser Sidetrack
→
→
and Fn
↑
Remark
Key code change
Only valid in programming
mode
Advertisement
