Charging Battery; Transferring Files From Computer; Turning On The Unit - Nextbook NX007HD-8G Manual

Hide thumbs Also See for NX007HD-8G:
Table of Contents

Advertisement

Available languages

Available languages

The device has a built-in rechargeable battery. No extra battery installation is required.
Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet via the DC-IN
port using the power adaptor. It takes about
the battery is fully charged, the charge indicator should light up in orange. During
charging, the indicator lights up in red.
Note:
a.
You are strongly recommended to charge the battery immediately when the device indicates the
battery is lower than 15%!
b.
You can operate the device even when it is being charged. But for extended battery life, it is suggested
NOT to use the device when it is charging.
c.
It is recommended to charge the battery before you use the device for the first time.
d.
For maximum performance, lithium-ion batteries need to be used often. If you don't use the device
often, be sure to recharge the battery at least once per month.
e.
Be sure to use only the dedicated power adaptor provided with the unit for charging.

Transferring Files from Computer

Before reading or playing files, you need to transfer media files from a computer to the
device.
(1) Connect the device to a computer with the supplied USB cable.
(2) Tap "Turn on USB storage" to connect the device to computer.
(3) Once connected, two removable disk drives will show on your computer. One
represents the internal memory of the device, and the other represents the
memory card inserted into the device. Now you can copy files from or to these disk
drives just as you would on your hard drive.
(4) As you complete file transfer, choose "Turn off USB storage" to disconnect the
device.
(5) Remove the device from the computer safely.
The pre-installed applications and Android OS occupy a considerable part of capacity – nearly more than
1GB, it is normal that you see huge difference between available memory space and total capacity.
To turn on the device, press and hold the Power button on the unit until you see the
boot-up screen. It may take a few minutes to start up the system, please wait before
you proceed.
To turn off the device, press and hold the Power button until you see the option
"Power Off", tap on "Power Off" and then tap on "OK".
Tip: For the sake of power saving, this device may sleep with the screen display off when
there is no touch action for a while (depending on the actual setting of Screen Timeout). You
can briefly press the Power button to wake it up.

Charging Battery

Turning On the Unit

3
hours to fully charge the battery. When
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents