Cedar DIW-15 Instruction Manual

Cedar DIW-15 Instruction Manual

Digital torque wrenches
Hide thumbs Also See for DIW-15:

Advertisement

TORQUE MEASUREMENT
2 YEAR WARRANTY
(RESTRICTIONS APPLY)
Imada, Inc. warrants its products to the original purchaser to be free from defects in
workmanship and material under normal use and proper maintenance for two years (one
year for adapters, attachments, batteries, and cables) from original purchase. This warranty
shall not be effective if the product has been subject to overload, shock load, misuse,
negligence, accident or repairs attempted by others than Imada, Inc.
During the warranty period, we will, at our option, either repair or replace defective
products. Please call our customer service department for a return authorization number
and return the defective product to us with freight prepaid.
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby
disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, non-
infringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or
punitive damages in connection with the use of its products and/or software.
12/08
Digital Torque
Wrenches
Models: DIW-15/20/75/120
with continuous data output

INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIW-15 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cedar DIW-15

  • Page 1: Instruction Manual

    In no event shall Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or Wrenches punitive damages in connection with the use of its products and/or software. Models: DIW-15/20/75/120 with continuous data output INSTRUCTION MANUAL 12/08...
  • Page 2 Models: DIW-15/20/75/120 DIW-15/20/75/120 List of Equipment Torque Wrench/Tester Stepless CW one-way clutch (included for DIW-15/20/75 available for DIW-120) AC adapter/charger Carrying case DIW-15/20/75/120 Digital Torque Wrench/Tester Ranges Accuracy ± 0.5% F.S., ±1 LSD Capacity Model lbf-in lbf-ft kgf-cm cN-m DIW-15 2.0~130...
  • Page 3: Specifications

    From empty - less than 5hours Working time 12 hours continuous use Drive DIW-15 1/4", DIW-20 3/8", DIW-75 3/8", DIW-120 1/2" Accessories AC/DC Adapter/Charger, 100~230VAC, NIST certificate USB Port Send data to computer via USB cable Charge light lights when charging, off when complete.
  • Page 4: Selecting Measuring Modes

    TORQUE MEASUREMENT TORQUE MEASUREMENT Output is available in PD, PP and C modes. In PD and PP modes peak SELECTING MEASURING MODES data is output when ZERO is pressed or activated by the AUTO ZERO Press ON/OFF to turn on. Press MODE to cycle modes GO, PP, PD or function.
  • Page 5: Manual Reset

    TORQUE MEASUREMENT TORQUE MEASUREMENT OUTPUT 4. Continuous Data Output Minimum (CLO) After Peak Down value is entered, "CLO" is displayed, then the USB Virtual COM Port CLO value. Press DOWN to move the numeric place and press When the tester is con- the UP to select values, then press PRG to enter.
  • Page 6: Data Memory

    If the battery is empty, power is turned off immediately. 1. Measure in PP or PD mode, when the display resets by either IMPORTANT! Use the provided CEDAR AC adapter/charger Auto Zero or manually pressing CLR, the peak value is stored.

This manual is also suitable for:

Diw-20Diw-75Diw-120

Table of Contents

Save PDF