Operation; Maintenance; Cleaning & Storage - Texas Equipment WS 900 Li User Manual

6. Fit nozzle to the telescopic tube
Two different mouthpieces are included. Attach one of the nozzle too the telescope tube
while you use the other one. Thereby the nozzle won't get easily lost.
a. Screw the nozzle clockwise (Fig.10) on telescope tube.
b. Fit the nozzle to telescope tube (Fig.11)
1. Starting
Push in the trigger (11)
2. Stopping
Release the trigger (11), keep the safety lock (12) in lock position when not in use
3. Adjust nozzle
Twist the nozzle to get stream or spray functions.

Keep the safety switch in the lock position when not in use.

Do not switch sprayer head between different types of chemicals without proper
cleaning.

Do not store liquids in the tank. Follow chemical manufacturer's directions for storage
and disposal.

Make sure sprayer cap, drain cap and measuring cap are tight and secure at all times

Clean the filter periodically to guarantee good performance.

After use rinse out sprayer and tank with clean water. Run water through the sprayer
for 30 seconds while pressing trigger. If necessary you may remove both nozzles for
cleaning if clogged.

Charge the battery 3-5 hours before storing.
Fig. 10

Operation

Maintenance

Cleaning / Storage
Fig 11
16