VOIIS V6 User Manual
English Rev. 1.0
I.
Device Overview
Flash Light On/OFF
Power On/Off
SOS Button
Flash Light
USB charge Port
II. Getting Started
1.
Open the back cover as indicated by
the arrow.
2.
Insert the SIM card as illustrated
below. Insert the battery afterwards.
3.
Connect the USB charger to the
handset. Charge the phone at least 6
hours before first use.
1
EN 2 3 4
SAVE THE TREES, SAVE THE EARTH
4. Symbol Overview on Home Screen
Signal strength
Unread message
Silent mode (No ringer)
Alarm on
Missed call
Connected via GPRS
Battery power
Please Read Before Proceeding
THE BATTERY IS NOT CHARGED WHEN
-
YOU TAKE IT OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK
-
WHEN THE PHONE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU
-
DISASSEMBLE OR ATTEMPT TO
DISASSEMBLE THE DEVICE.
Privacy Restrictions
Some countries require full disclosure of
recorded telephone conversations, and
stipulate that you must inform the person
with whom you are speaking that the
conversation is being recorded. Always
obey the relevant laws and regulations of
your country when using the recording
feature of your phone.
Limitation of Damages
TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, IN NO EVENT SHALL MOBILE
ACTION OR ITS PROVIDERS BE LIABLE TO USER OR
ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES OF ANY KIND, IN CONTRACT OR TORT,
INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF
REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS
OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF
PROFITS ARISING OUT OF, OR RELATED TO, IN ANY
MANNER, OR THE DELIVERY, PERFORMANCE OR
NONPERFORMANCE OF OBLIGATIONS, OR USE OF
THE WEATHER INFORMATION, DATA OR
DOCUMENTATION HEREUNDER REGARDLESS OF
THE FORESEEABILITY THEREOF.
III. Handset Operation
The VOIIS Senior Phone offers 8
major functions on the menu:
‐
[1] Message: edit and send text
message.
‐
[2] Weather: acquire the weather
forecast.
‐
[3] Call Log: log your call history.
‐
[4] Contacts: keep your contact
information in a phonebook.
‐
[5] Alarm: set up wake‐up calls for
reminder/notification purpose.
‐
[6] Health: log your health records.
‐
[7] Calculator
‐
[8] Settings: configure basic and
advanced settings including Sync,
Network, SOS and security settings.
3.1
Contacts
Contacts allows you to input 8 photo
contacts (quick‐dial contact) and 300
general contacts.
‐ Add a General Contact ‐
1.
To add a general contact for the first
time, press [Menu], scroll down the
menu using the up (︿) and down (﹀)
arrow keys and select [Contacts],
then press [Add] to create a new
contact. To add a contact to an
existing contacts list, press: [Menu] >
[Contacts] > [Options] > [New
contact].
2.
Use the up (︿) and down (﹀) arrows
to select the field you want to input
for this contact, and press [Edit].
Select a photo or ringtone for this
contact if needed, and press [Select]
to complete your edits. Press [Back]
to save the contact information.
‐ Add a Photo Contact for Quick‐Dial ‐
1.
Press [Menu] > [Contacts], and you'll
see 8 sets of photo contacts that can
be edited as quick‐dial contacts. Scroll
down 1 through 8, and press [Edit] to
edit the contact information.
2.
To change the photo for photo
contacts, you have to first login to
VOIIS server (www.voiis.com), and
import the photos (up to 16 photos)
from your computer. Start
synchronizing the data from VOIIS
server to your phone, and you may
update the photo on your phone.
Ringtone can also be updated the
same way via data synchronization
with VOIIS server. (See 3.6 for more
details about data synchronization)
3.
To make a quick‐dial call, you can
press the up (︿) and down (﹀)
arrow keys on the main screen, and
press the number (1 to 8) of photo
contact from the list to make the call
quickly.
3.2
Alarm
Alarm allows you to set up 1 wake‐up
alarm and 3 additional alarms (Alarm
1‐3) for general purposes. Each of
Alarm 1 ‐3 further allows you to set
up 4 different sub‐alarms for
reminders and notifications at
different times, which is good for
recoding health‐check
measurements.
‐ Set up Wake‐up Alarm ‐
Press [Menu] > [Alarm], and select
[Wake‐up alarm].
‐ Set up Alarm 1‐3 ‐
1.
Press [Menu] > [Alarm], and select
[Alarm1], [Alarm2] or [Alarm3].
2.
Each of Alarm 1‐3 allows you to
further set up 4 different sub‐alarms
for reminders of various purposes. To
set up an alarm for health‐check
measurement purpose, you may
select: [Alarm 1‐3] > [Health Record],
select the health‐check item that you
want to be reminded of (i.e. blood
pressure, pulse rate, blood sugar,
etc.).
3.
When the alarm rings, stop the
ringing, and you'll be prompted to
enter the measurements you got for
the selected health‐check items
previously.
3.3
Health