1. Manuals
  2. Brands
  3. General Manuals
  4. Meat Grinder
  5. GSM-50
  6. Operation instruction manual

General GSM-50 Operation Instruction Manual

Meat mincer
Hide thumbs
Table of Contents

Advertisement

Quick Links

GSM-50 / GSM-100
MEAT MINCER
OPERATION INSTRUCTION FOR MEAT MINCER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GSM-50 and is the answer not in the manual?

Questions and answers

Related Manuals for General GSM-50

Summary of Contents for General GSM-50

  • Page 1 GSM-50 / GSM-100 MEAT MINCER OPERATION INSTRUCTION FOR MEAT MINCER...

  • Page 2: Table Of Contents

    4.3 WIRING DIAGRAMS GSM-50 AND GSM-100 4.4 FUNCTIONAL CHECK 5 USING THE APPLIANCE 5.1 CONTROLS 5.2 SETTING UP THE GSM-50 AND GSM-100 FOR USE 5.3 FILLING THE MINCER(see fig 5) 6 REGULAR CLEANING 6.1 GENERALITIES 6.2 PROCEDURE TO FOLLOW FOR CLEANING THE APPLIANCE 7 MAINTENANCE 7.1 GENERALITIES...

  • Page 3: Information About The Appliance

     Surfaces and avoid pulling the cable to remove the plug from the socket.  If the GSM-50 and GSM-100 has a presumed malfunction or does not work correctly, do not use it or repair it.contact the “Service Centre”. ...

  • Page 4: Constructure Characteristics

     Easy to handle 1.3.2 CONSTRUCTURE CHARACTERISTICS The GSM-50 and GSM-100is made from stainless and aluminum ally for food appliances. These metals are regarding hygiene, they are also acid and salt resistant are also rust proof. 1.3.3 APPLIANCE COMPONENTS FIG 1-General view of the GSM-50 and GSM-100...

  • Page 5: Consigning The Appliance

    INSTALLING THE APPLIANCE 4.1 APPLIANCE LOCATION The work surface where the GSM-50 and GSM-100 will be located must be suitable for the size of the appliance,please refer to the measurements given in Tab 1.The work surface must be level and dry and at a height of 80 cm from the ground.

  • Page 6: Wiring Diagrams Gsm-50 And Gsm-100

    1-Start button “on” 2-Stop button “off” 3-Reverse button “turn over” 5.2 SETTING UP THE GSM-50 and GSM-100 FOR USE N.B before using the appliance makes sure all the components that can be removed are secured in position (see fig 6) ...

  • Page 7: Using The Appliance

    To clean the main structure use a damp cloth remember to frequently rinse The grater roller mounted on the GSM-50 and GSM-100 Should be brushed. Carefully clean the punched holes. Make sure all the components are completely dry before remounting them.
  • Page 8 4) Once all the components have been mounted secure by screwing the lock nut in place. FIG 6-Removing components FIG 7-Diagram of GSM-50 and GSM-100 stripped for cleaning food tray knob nut Mincer block Screw feeder...

  • Page 9: Maintenance

    MAINTENANCE 7.1 GENERALITIES Before servicing the appliance you must disconnect the electricity supply plug isolating appliance from the main power source. 7.2 FOOT SUPPORTS In time the foot supports can deteriorate causing instability. If this is the case replaces them. 7.3 POWER SUPPLY CABLE Periodically check wear in the power cable and if necessary contact the “SERVICE CENTRE”...

This manual is also suitable for:

Gsm-100

Table of Contents