Summary of Contents for AN SON 720P 1.3MP
- Page 1 Address: 4F, Block 5, Wuzi Industrial Park, Fada Road, Bantian, Longgang District, Shenzhen, China E-Mail: info@cctv-ax. net Website: www. cctv-ax. com...
- Page 2 Contact your supplier immediately. Network Camera device Accessory bag Warranty card Certificate of approval The followings are optional accessories: Power adapter, power connector and power cable (Optional) User manual (Optional) Installation CD (Optional) Quick Installation Guide (Optional) Rev. 1.4_EN141015 Update date: Sep. 6th, 2012 This manual is applied to the following products of the software version 4.3.0 and WEB version Rev.1.4(EN141015) 1.0.0 and above.
-
Page 3: Table Of Contents
Statement: CONTENTS The right of the propriety and the final explanation of all parts of this product, including accessories and software, SAFETY INSTRUCTION are reserved for our company. This user manual has no guarantee or promise in any form. If there are any data CHAPTER 1 OVERVIEW loss, profit loss or career termination caused directly or indirectly by this user manual or the product information mentioned, or the damages and hazards incurred directly, indirectly, intentionally and non-intentionally by any... - Page 4 USING WEB BROWSERS CONNECTION 4.2.1 NETWORK SETTINGS 3.1. 1 LOGON 4.2.2 RTSP PARAMETERS 3.1. 2 VIDEO PLUG-IN 4.2.3 NTP PARAMETERS 3.1. 3 WEB BROWSER INTERFACE 4.2.4 HEARTBEAT SETTING 3.1. 4 CONNECTION, SNAPSHOT AND RECORDING 4.2.5 WLAN SETTINGS 3.1. 5 RECORDING IN SD CARD RECORDING PARAMETERS 3.1.
-
Page 5: Safety Instruction
HD Network Camera User’s Manual APPENDIX B PORT MAPPING Safety Instruction APPENDIX C REFERENCE FOR CLIENT SETTINGS Electrical safety The device is not designed for water-proof. Please take good measures for water-proof and thunder-proof when APPENDIX D PRODUCT SPECIFICATION using the device outdoor, or it may incur unpredictable serious damages; do not let any over flown water or other liquid into the device so as to avoid short-current which may cause fire or electric shock. -
Page 6: Chapter 1 Overview
HD Network Camera User’s Manual HD Network Camera User’s Manual Dust, moisture and any drastic temperature variation can affect the service life of the camera. Please try not to CHAPTER 1 Overview place the device in these places. Please do not place the camera at the place where vibrates. When transporting or moving the device, please 1.1 Product Description handle it with care. -
Page 7: Interface Definition
HD Network Camera User’s Manual HD Network Camera User’s Manual It supports FTP real-time video recording. Item Application It supports RTSP protocol and is able to use PDA/PPC for motion monitoring. DC-IRIS DC drive automatic iris lens mount. It has its built-in WEB Server and supports WEB browsing and management. CVBS (Analog output) CVBS: Analog video output, standard BNC interface. -
Page 8: Chapter 2 Installation And Connection Ready
HD Network Camera User’s Manual HD Network Camera User’s Manual CHAPTER 2 Installation and connection ready automatic iris lens, please carry out intellectual correction for automatic iris lens once so that the device can control the iris accurately. Please refer to the section 4.5 Auto IRIS Intellectual Correction. SD card installation: Please insert SD card facedown into the SD card slot in the camera. -
Page 9: Network And Ip Address Configuration
HD Network Camera User’s Manual HD Network Camera User’s Manual IP address: 192.168.1.4 (It is stick to the device tag for customer-made model.) Sub-network mask: 255.255.0.0 Gateway: 192.168.1.1 Data port: 6002 WEB port: 80 2.2.2 Restoring Factory Defaults Hard Reset If it needs to restore the network camera’s system settings to be the factory defaults, please refer to the following steps: 1) Press FUN bottom at the bottom of the device for over 5 seconds. - Page 10 HD Network Camera User’s Manual HD Network Camera User’s Manual The system provides the management test tool-Admin Tool. Please check the system CD. The tool can: Configure the IP address of the specified camera Running the Admin Tool management tools automatically retrieve network camera device available in the current 1) Search network cameras or video servers in the network.
-
Page 11: Test Connection
HD Network Camera User’s Manual HD Network Camera User’s Manual 2.2.4 Test Connection After configuring the IP address, please click “Start” at the lower left corner of user computer, then “All programs”- ”Accessories” - ”Run” to select and open “Command Prompt”. In the command line, use PING command to test if the computer is connected to the network camera. -
Page 12: Video Plug-In
HD Network Camera User’s Manual HD Network Camera User’s Manual 3.1.2 Video Plug-in First-time logon and installation: After logging on successfully, the user is prompted to download the play plug-in if it is the first time for the device to access. Please download and run the play plug-in installation manually. The name of the play plug-in is HDLive.exe. -
Page 13: Web Browser Interface
HD Network Camera User’s Manual HD Network Camera User’s Manual Note: It is required to install this play plug-in if using WEB to browse the video. Currently the plug-insupports Windows XP/2003/7 32 bits OS. Due to the reason that the security setting of IE browsers is different, it may be required to allow the uploading of the play plug-in. -
Page 14: Connection, Snapshot And Recording
HD Network Camera User’s Manual HD Network Camera User’s Manual In the video display, the information like camera name, date and time, can be concatenated. Please refer to the : Click this button to capture the image snapshots currently browsed. The “Save as” dialog box is popped out section 4.1 for settings. -
Page 15: Video Specification Adjustment
HD Network Camera User’s Manual HD Network Camera User’s Manual the system shall automatically start the local recording into the SD card when any malfunction like network Types of video transmission disconnection occurs, avoiding the data loss caused by the interrupted network. Use a slide bar to adjust the buffer time for video image so as to make the video connection more real-time or smoother. - Page 16 HD Network Camera User’s Manual HD Network Camera User’s Manual UP, DOWN, LEFT AND RIGHT KEY Operation: Move the PTZ to a location and click “Save” button to save the current location to be preset point. The keys are used for controlling the movement of the PTZ orientation. Select one preset point to click the corresponding button to start the operations like edition, calling, and deletion, etc.
-
Page 17: Image Modes
HD Network Camera User’s Manual HD Network Camera User’s Manual 3.1.8 Image Modes 3.1.9 Video Replay Click “Playback” label in the right of the video display area to switch to the record file play windows to play the local record files and those on the SD card of the network camera. (Fig.3-1-14) Click “Image mode”... -
Page 18: Video Stream Parameter
HD Network Camera User’s Manual HD Network Camera User’s Manual If there is a SD card in the camera, it is able to click “Search” button to search the records on the SD card according to date and channel. The “Select local files” button can be used to select the local manually recorded or backup files and list below. -
Page 19: Osd
HD Network Camera User’s Manual HD Network Camera User’s Manual considering the bandwidth occupation, it can set up to be the best; if the image quality and the bandwidth (bit rate) are both under consideration, it can set up to be better or even better. Bit rate upper bound: 32Kbps~2048Kbps. -
Page 20: Motion Detection
HD Network Camera User’s Manual HD Network Camera User’s Manual Overlap channel name, overlapping week and date and time are optional for users. Motion threshold: The default value is 1 (The range of the value is 0 - 100). The motion threshold value is for Overlap channel name: The position can be relative to the upper left, lower left, upper right, lower right of a video. -
Page 21: Advanced Functions
HD Network Camera User’s Manual HD Network Camera User’s Manual The time phase for motion detection can be set based on requirements. Users can set up four time phases, and also can copy the set time phases to the areas where the same time phase is set for defending. Meanwhile, the process methods are also selectable when any objects in motion are detected. - Page 22 HD Network Camera User’s Manual HD Network Camera User’s Manual B/W mode: It defaults to be auto. The camera can automatically switch between color and black/white according Shutter speed: Auto, 1/25s~1/10000s. Users can select an appropriate shutter speed according to circumstances to the ambient illumination.
-
Page 23: Device Information
HD Network Camera User’s Manual HD Network Camera User’s Manual Image rotation: There are possibilities that the camera is installed upside down due to various reasons. It is Exposure compensation: 50-250 for selection. Exposure compensation is a way for exposure control. If a able to set the camera to rotate its image 180 degree or 270 degree. -
Page 24: Privacy Mask
HD Network Camera User’s Manual HD Network Camera User’s Manual Click "Privacy" label at the right of the video display area. The left side of the WEB interface is switched to the private area setting window divided by grid. Press the mouse’s left key to drag and change the size of the private area. -
Page 25: Using Nvr Device Connection
HD Network Camera User’s Manual HD Network Camera User’s Manual Use intellectual mobile, PDA and PPC that support the standard H.264 to directly play RTSP real-time video 3.4 Using Video Management Software Connection stream by the software like Coreplayer. Select “File -> Open URL” in Coreplayer or VLC software and key in the RTSP address to play the RTSP real-time video stream by Coreplayer (Fig.3-5-3). -
Page 26: Chapter 4 Parameter Setting
HD Network Camera User’s Manual HD Network Camera User’s Manual Chapter 4 Parameter Setting 4.1.1 Audio Parameter Setting Select the menu “Channel parameters -> Audio parameters” to set up audio format, audio amplification times, After logon, click “Configuration” at the upper right corner of the WEB browser page to open the menu for and audio voice channel mode, etc., as shown below: parameter setting. -
Page 27: Rs485 Parameters
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.1.2 RS485 Parameters 4.2.1 Network Settings Select the menu Channel -> RS485 to set up RS485’s parameters like port control protocol and bit rate, etc. Select the menu “Basic network settings” for users to change the information like IP address, gateway, port, and DDNS, etc. - Page 28 HD Network Camera User’s Manual HD Network Camera User’s Manual Remote alarm receiving center Note: After enabling the remote alarm receiving center, users can receive the information like status and alarm from the management center. The information is sent actively by the network camera toward the management center. 1) When the IP address or port number is changed, it is required to save the settings in the This function defaults to be off.
-
Page 29: Rtsp Parameters
HD Network Camera User’s Manual HD Network Camera User’s Manual Note: Starting the RTSP function, users can use VLC or CorePlayer to play RTSP real-time video stream. Please refer to the section 3.5 about connecting real-time video stream via RTSP protocol. The RTSP port defaults to be 554. Please choose VLC compatible mode when using VLC software for connection, and choose QuickTime compatible 1) DDNS default to be off. -
Page 30: Heartbeat Setting
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.2.4 Heartbeat Setting Heartbeat is a self-defined command word for user end and server to notify each other their own status. The status is sent at interval similar to heart beats, so called heartbeat. The heartbeat mechanism is mainly used for the center to check if the network camera is running properly. -
Page 31: Recording Parameters
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.3 Recording Parameters Item Parameters Application and specification Storage Schedule and Always: 24hrs continuous recording. In the menu for recording parameters, it is able to set up the parameters of the device’s SD card recording, like mode Schedule Schedule: recording by time-phased... -
Page 32: Ftp Parameters
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.3.2 FTP Parameters 4.3.3 Snapshot Parameters Click “Snapshot parameters” to set up the number of snapshots (1-5 pieces) each time, snapshot-taken interval Click “FTP Set” to set up the parameters like FTP server and recording timetable, etc. (more than 40ms), and snapshot processing methods. -
Page 33: Recording When Network Disconnected
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.3.4 Recording When Network Disconnected The device supports automatically starting SD card recording when the network is disconnected. This function requires setting up heartbeat mechanism with the center so as to detect the network disconnection and start recording automatically. -
Page 34: Alarm Output
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.4.2 Alarm Output When selecting “manually closing alarm output”, users can manually control the switch of the alarm output via “manually closing alarm” and “manually opening alarm” buttons. Alarm output settings can set up the types of alarm output arming including output according to the arming time, output normally on, and output normally off. -
Page 35: Advanced System Maintenance
HD Network Camera User’s Manual HD Network Camera User’s Manual Add user Modify permission Click “Add user” button. The administrator can add new user. And click “Return” to go back to the upper-level Select a user from the user list. The current permission list of the user appears at right. The administrator can click the checkbox in front of a permission to modify it. -
Page 36: Upgrading Software Via Web
HD Network Camera User’s Manual HD Network Camera User’s Manual (Fig.4-5-6) (Fig.4-5-7) Note: The system can support several time synchronization methods. Users can set up the synchronization method based on their requirements. 1) Please select the software that has the same hardware version when upgrading. The 1) Synchronization with the local machine: Please check if the user computer’s clock is correct at first. -
Page 37: Restoring Factory Defaults
HD Network Camera User’s Manual HD Network Camera User’s Manual Click “Save settings” to save all the parameters modified before the camera is disconnected with power. Or all 4.5.2.6 Auto-IRIS Intellectual Correction the modified parameters shall be lost after the power is off. Because the nominal iris parameters of each auto-iris lens are slightly different from the actual parameters, many cameras in market cannot precisely control the lens iris and set the auto-iris to be fully open. -
Page 38: Log
HD Network Camera User’s Manual HD Network Camera User’s Manual 4.7 log Q: What should I do if I modify the original Web port and data port of my network camera and cannot access the network camera? It is able to view user logons via the menu “System parameters -> View system logs”. A: Please use Admin Tool to retrieve and modify the ports. - Page 39 HD Network Camera User’s Manual HD Network Camera User’s Manual Appendix C Reference for Client Settings Q: When I use the camera outdoor, the image is in blank. What happens? A: It is suggested to install and use auto-iris lens outdoor. If using auto-iris lens, please enter the camera’s WEB management page at the first-time.
- Page 40 Player software CorelPlayer WBE browser IE6.0 and over Windows XP/Vista/Win7 IE8.0 recommended Appendix D Product Specification Model 720P 1.3MP 1080P 2.0MP Sensor 1/3" CMOS 1.3MP 1/2.9" CMOS 2.0MP Color: 0.02Lux @ F1.2 Color: 0.05Lux @ F1.2 Minimum Illumination B&W: 0.01Lux @ F1.2 B&W: 0.02Lux @ F1.2...
Need help?
Do you have a question about the 720P 1.3MP and is the answer not in the manual?
Questions and answers