Side - D-Link mydlink DCH-S220 User Manual

Section 1 - Product Overview
1 Status LED
2 WPS Button
3 Reset Button
D-Link DCH-S220 User Manual
Hardware Overview
Solid Green
Blinking Green (slow)
Blinking Orange
Solid Red
Pressing the WPS button for 1 second allows you to connect with Wi-Fi clients using Wi-Fi Protected Setup
Pressing the reset button for more than 5 seconds will reset the DCH-S220 to the factory default settings

Side

1
2
3
The device is connected to the network
WPS is working
The device is not connected to the network
The device is powering on or the firmware is being upgraded
5