Bluetooth Operation - Boss Audio Systems BV7332B User Manual

Bluetooth Operation

Pairing Your Mobile Phone
Before using Bluetooth functions, you must pair your mobile phone and the unit.
Pairing is a special process used when two devices connect for the first time.
The pairing process is used to generate a link key that is used for authentication
purposes for future Bluetooth connections between devices. Your mobile phone
can initiate a search for a new device and pair the unit.
1. Access the mobile phone's Bluetooth function and set the Bluetooth function
to on
2. Use the mobile phone's add a new device feature. "BOSS AUDIO" appears
in the list on your mobile phone.
3. Select "BOSS AUDIO". The unit has an auto pairing function. It will search for
the Bluetooth mobile phone and pair automatically. A prompt to connect should
appear on your mobile phone. Accept the request and initiate the process
NOTE: Some mobile phones require a "pass key" or pairing code to connect.
If your phone requires a pass key or pairing code, you will need to enter this
number. The default pairing code for the unit is "0000".
Auto-Reconnection
This unit has a built-in auto-reconnection function. In some conditions, the unit
will auto reconnect with the mobile phone (note: the mobile phone must have
been paired with the unit before.)
• When you turn off the unit and then turn it on again.
• Switch off the ACC wire and switch it on again.
Managing Incoming Calls
Answering an Incoming Call
Press the GREEN button to answer an incoming call.
Rejecting an Incoming Call
Press the RED button to reject the incoming call.
Bluetooth Wireless Technology Music Function
Wireless products featuring Bluetooth technology provides an Advanced Audio
Distribution Profile (A2DP) profile for streaming music from a mobile phone or a
portable multimedia player (PMP), sometimes referred to as a MP3 player. The
unit allows you to play back audio files from your mobile phone or a PMP using
a Bluetooth connection.
Note: Your mobile phone must support this function. Please refer to your
mobile phone's instruction manual.
When in A2DP mode
Press the PREVIOUS button on the front panel of the unit to choose the pre-
vious track.
Press the NEXT button on the front panel of the unit to choose the next track.
Press the APS/PAUSE button on the panel control to pause play.
15