Adjusting Audio Monitor Output Level - BEL BM-A1-S User Manual

BEL DIGITAL AUDIO

Adjusting audio monitor output level

In the following tables, ON is obtained with a switch lever in the DOWN position. The
adjustments are located on the main board.
SW3
1
2
3
4
5
6
7
8
Note: It is intended that only one switch lever is set to ON for each monitor output.
The ON position is obtained with a switch lever in the direction of the arrow
(downward in the above drawing).
*Clockwise rotation increases gain.
 2004 BEL (Digital Audio) Ltd
BM-A1-S
Analog monitor output adjustments – 0dB setting shown
Monitor Setting when ON
Output
Left 0 dB (0 on analog scale = 0dBu on output)
Left 4 dB (0 on analog scale = +4dBu on output)
Left 8 dB(0 on analog scale = +8dBu on output)
Left Variable – adjacent pot* 0 to +12 dB
Right 0 dB (0 on analog scale = 0dBu on output)
Right 4 dB (0 on analog scale = +4dBu on output)
Right 8 dB(0 on analog scale = +8dBu on output)
Right Variable – adjacent pot* 0 to +12 dB
10
Configuration
Version 0.3