Incorrectly Seated Y
-
Drive Flexible Ribbon Cables
Incorrectly Seated Y
-
Drive Flexible Ribbon Cables
The Ribbon Cable is clearly improperly seated
into the connector. You can tell by observing the
line of the connector compared to the FPC, they
should be parallel.
The Locking Tab will offer a greater resistance to
closing in the case.
Note the cable is crooked. In this case the Tab on
the Ribbon cable was improperly seated at the
top. This can cause bars, lines, intermittent lines
abnormalities in the picture.
Remove the ribbon cable and re-seat it correctly.
70
August 2010
42PJ350
Plasma