Specifications; Led Light Indicator - Bilt DWO-3 User Manual

Bluetooth Helmet Headset
OPERATION
MUSIC OPERATION
Please refer to the devices user manual first.
1 PLAY / PAUSE
Under Bluetooth A2DP music play state, short press the button 2 to play
or pause the music.
2 TRACK FORWARD
Right twist button 2 to forward track.
3 TRACK BACKWARD
Left twist button 2 to backward track.
Note: The above funtion requires the music device to support Bluetooth A2DP and AVRCP.
GPS NAVIGATOR OPERATION
1 Please pair GPS device and please refer to the GPS navigator user
manual first to share the audio information from GPS via A2DP.
2 In phone or interoom call active and music-playing state, left twist and hold
button 2 can go to turn down the volume, right twist and hold buttom 2
can go to turn up the volume, when reaching the maximum or minimun
volume, a "DiDong" tone will be played.
3 Mobile phone or intercom calls have a higher priority than GPS audio.
Mobile phone/intercom calls will interrupt the GPS audio. The audio will
be restored automatically after the call has ended.
5

SPECIFICATIONS

DWO - 3
Supports HSP, HFF, A2DP, AVRCP, and Full Duplex
intercommunication

LED Light Indicator

LED Indicator type
All LED indicator off
Red/Blue lights flashing alternately
Blue light short flashing every 3 sec.
Blue light long flashing every 3 sec.
Red Led flash 2 times every 60 minutes
Red Led indicator flash once every
second
Red Led indicator shining still
Indicated State
Power off
Pairing mode
Standby state
Connected state
Battery is low
Charging
Charging completed