Advertisement
I I n n t t r r o o d d u u c c t t i i o o n n
Congratulations on your purchase of the Mic/Line Interface from Spirit by
Soundcraft. You are about to enjoy one of the great features of the Digital prod-
uct line from Spirit - Expandability.
The team would like to you to know that we take great pride in our products and
may we wish you many successful years with your new purchase.
Please be aware that the recommended TDIF Cables are not supplied with the
unit, but are available from your Spirit dealer.
The Mic/Line Interface is designed to meet the following requirements:
As an 8 channel bi-directional analogue audio interface to a Spirit Digital 328/324
Mixing Console.
As an 8 channel bi-directional analogue audio interface for any other Digital Mixing
Console fitted with a TDIF-1 Input / Output connection.
As an 8 channel bi-directional analogue audio interface for any Digital Multitrack
Tape Recorder fitted with a TDIF-1 Input / Output connection.
As an 8 channel bi-directional Digital audio interface for any Analogue Multitrack
Tape Recorder or other device fitted with analogue Input / Output connections.
This interface is primarily an external accessory for the Digital 328/324 and other
forthcoming Spirit Digital consoles. This interface provides eight channels, each
with a Microphone Input, Line Input, Insert Point and a Direct Output. All chan-
nels include a Trim Control, High Pass Filter, Channel Metering, Insert Point
switching and individual Phantom Power switching.
O O p p e e r r a a t t i i o o n n
1) Connect the TDIF cable from the Interface to the required TDIF port on
the Digital 328/324 as shown below.
2) To configure the Digital 328/324 as the wordclock master, enter the
328/324 menu pages by pressing the <MENU> button on the right hand
side of the LCD display. Using the encoder beneath the display, scroll up
or down until the 'Clock Source Sel' menu is highlighted, and press
<ENTER>. Here, either the internal 44.1kHz clock or the internal 48kHz
clock must be selected, depending on the sampling rate at which work is to
be done. Press <ENTER> to set the sample rate and <MENU> to
return to the menu pages.
1.2
Rearcon of 328
Rearcon of Mic/Line Interface
Mic/Line Interface Introduction
Advertisement
