3: Getting The Most Out Of Mobi; Multi-User Mode - eInstruction MOBIView Quick Start Manual

3: Getting the Most Out of Mobi

Multi-User Mode

Mobi View allows up to nine devices,
including Mobi View, Mobi Learners,
Mobi KWIK, and DualBoard to
interact simultaneously in multi-user
mode.
Mobi View is automatically
designated as the "Presenter" tablet
in a multi-device environment, (if
there is no other device already
set as "Presenter") allowing you to
start and stop multi-user mode and
to view instant reports if using one
of eInstruction's student response
systems.
Launching Multi-User Mode
1. Pair each additional Mobi
you wish to connect by first
pressing the Activation button
22
on the Mobi RF Hub, and
then the Activation button
on the Mobi. You must
pair the additional Mobi to
the hub within 2 minutes.
RF Hub
Tip! If adding a Mobi KWIK or
Learner, the activation button is
the blue button next to the battery
compartment.
2. From the Annotate screen,
press the Multi-User button.
Activation button