Performing The Network Settings; Install The Software; Configure The Network Settings Of The Camera Using The Panasonic Ip Setting Software - Panasonic WV-NP244 Operating Instructions Manual

Performing the Network Settings

Install the software

Before installing the software, read the readme file on the provided CD-ROM first.
Software included on the provided CD-ROM
• Panasonic IP setting software
Configure the network settings of the camera using this software. Refer to the following for
further information.
• Viewer Software "Network Camera View2"
It is necessary to install the viewer software "Network Camera Viewer2" to display images
on a PC. Install the viewer software by double-clicking the "Setup.exe" icon on the provided
CD-ROM.
Configure the network settings of the camera using the
Panasonic IP setting software
It is possible to perform the network settings of the camera using the IP setting software on the
provided CD-ROM.
When the Panasonic IP setting software does not work to perform the network settings of the
camera, perform the network settings of the camera and the PC individually on the "Network
setup" page of the setup menu. Refer to the network operating instructions (PDF) for further
information.
Important:
• When using Windows XP SP2, the "Windows Security Alert" window may be displayed when
starting the IP setup software. In this case, click the "Unblock" button on the displayed
"Windows Security Alert" window.
• For the security enhancement, the MAC address/IP address of the camera to be config-
ured will not be displayed when around 20 minutes have passed after turning on the power
of the camera.
• Panasonic IP setting software is inoperable in other subnets via the same router.
18