›
Add a WLAN manually
1
In Idle mode, open the application list and select
Settings
Wireless and network
→
Add Wi-Fi network.
→
2
Enter the SSID for the network and select the security
type.
3
Set the security settings depending on the selected
security type.
4
Save.
Select
›
Connect to a WLAN using a Wi-Fi
Protected Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a WLAN with a WPS button,
1
In Idle mode, open the application list and select
Settings
Wireless and network
→
This Manual: http://www.manuallib.com/file/2523063
2
3
Wi-Fi settings
→
To connect to a WLAN with a WPS PIN,
1
2
3
AllShare
Learn to use the Digital Living Network Alliance (DLNA)
service that enables you to share media files between
DLNA-enabled devices in your home over a WLAN.
Wi-Fi settings.
→
You must first activate the WLAN feature and add a WLAN
profile.
Select
WPS button connection.
Press a WPS button on the access point within 2
minutes.
In Idle mode, open the application list and select
Settings
Wireless and network
→
Select a network indicated by the WPS icon and select
WPS PIN.
On the access point, enter the PIN and press the start
button.
p. 94
►
Wi-Fi settings.
→
95
Connectivity