Troubleshooting - Gardena Accu 60 8800 Operating Instructions Manual

8. Troubleshooting

WARNING !
Risk of Injury !
Replacing the Cutting
Blades :
E
D
D
F
H
Changing the Accus :
K
L
Blades can cause serious injury.
v v Do not push the safety lock of the Accu-shears forwards
when rectifying faults.
If the Accu Shears do not cut cleanly even after thorough cleaning,
the cutting blades are defective and must be replaced with new
E ones.
Please only use original GARDENA Accu Shears Cutting
Blades :
Lawn shears blade set
with blade protection
Shrub shears blade set
with blade protection
F
1. Remove the wheels (see "3. Assembly" ).
2. Press both catches
all the way forwards.
3. Open the runner
4. Clean the area around the gears and coat the gear wheels with
G
acid-free grease (Vaseline).
5. Insert the blade set
6. Push the runner
engage again.
Risk of short circuit, Risk of fire.
v v The contacts of the accu must not touch metallic parts.
1. Loosen screw
2. Remove cover
I
3. Remove accus
4. Pull cable receptacles
5. Install new accus in reverse order.
With all other malfunctions, please contact one of the GARDENA
service centres or a dealer authorised by GARDENA.
J
Repairs must only be performed by specialists authorised by
GARDENA.
Accu 60 / 75
Accu 90
Accu 75 / 90
E
simultaneously and push the runner
F
and remove the blade set
G
and close the runner
F
all the way back until both catches
I
.
J
.
K
.
L
off accu pack.
Art. No. 2345
Art. No. 2346
Art. No. 5378
F
G
.
F
.
E
15