Chapter 03
Connecting and Using a Source Device
Before Connecting
Check the following before you connect this product with other devices.
Pre-connection Checkpoints
― Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
― Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
― Check the types of ports at the back of the product you want to connect.
Connecting and Using a PC
Select a connection method suitable for your PC.
― Connecting parts may differ in different products.
Connection Using the HDMI Cable
― Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
HDMI IN 1, HDMI IN 2
1
Connect the HDMI IN 1 or HDMI IN 2 port on the back of the product to the HDMI port on the PC using an HDMI cable.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC.
3
HDMI 1
HDMI 2
Change the input source to
or
― Provided ports may vary depending on the product.
― To display 3440 x 1440 @ 50 Hz, use an HDMI cable that supports 3440 x 1440 @ 50 Hz. Make sure that the graphics card of
the HDMI source supports 3440 x 1440 @ 50 Hz.
controlling the JOG button UP/DOWN, when input source is not set.
23