Advertisement
Advertisement
Table of Contents
Summary of Contents for Tiptop Audio CYMBL909
- Page 2 On the left side of the module are the Crash controls, on the right are the Ride. To start using the CYMBL909, take two gate outputs from your sequencer and plug them into the GATE IN for each sound, plug the CR OUT and RD OUT to your mixer or sound system, set ACCENT to max, set the LEVEL half way and TUNE half way.
- Page 3 While the original 909 has one global accent knob for setting accents levels for all of its sounds, the CYMBL909 (and all other drum modules in this series) offers an independent accent level control. This feature expands the work flow beyond what is possible with the original machine.
- Page 4 VC-TUNE Explained. The sample playback rate of each generator in the CYMBL909 module was replaced with an analog Voltage Controlled Oscillator which allows full control over the tuning of the sound, both manually (TUNE knob) and with Voltage Control (VC-TUNE jack).
Need help?
Do you have a question about the CYMBL909 and is the answer not in the manual?
Questions and answers