Safety Measures; Warning; Caution; Care And Maintenance - American Megatrends B.O.L.T. VA01 User Manual

B.O.L.T User Manual

Safety Measures

Warning


If you encounter any problem while taking blood pressure measurement, such as inflation does
not stop or air leakage in the cuff, remove the cuff or pull out the air tube from the base unit.

Do not wrap the cuff to measure the BP over the arm where an intravenous injection or
transfusion is being given to the patient.

Do not operate the gadget in places where inflammable gas, such as highly inflammable
anesthetic, may be generated or in a high-pressure oxygen room or an oxygen tent.

Keep the gadget away from infants, small children or anyone who are incapable of using the
gadget in the correct manner.

Please do not use the same cuff for patients who are highly infectious as this practice may cause
cross-infection.

Make sure the ear canal is clean for temperature measurement.

Use dust cover for IRT probe during the temperature measurement.

Place the finger inside the SpO2 probe properly during the Blood oxygen level measurement.

Use by trained professionals only.

Caution


Do not use the gadget while moving in a vehicle as this may result in erroneous readings.

Do not use any other branded cuffs as this may result in reading errors.

Do not use unauthorized parts and accessories.

Do not store or use this gadget in locations which are maintained above the specified
temperature and humidity ranges.

Fingernail polish or false fingernails may cause inaccurate SpO2 readings.

SpO2 measurements may be adversely affected in the presence of high ambient light.

Use only American Megatrends India Specified batteries and charging devices.

Care and Maintenance


Store the gadget and the components in a clean and safe location.

Changes or modifications not approved by the manufacturer will void the user warranty.

Keep the accessories and gadget away from rain, sweat and water.

Do not disassemble, repair or modify the gadget and the components by yourself.

Clean the rubber touching the finger inside the SpO2 probe gently by a soft cloth dampened with
70% isopropyl alcohol before measurement.
© Copyright 2015, All Rights Reserved. American Megatrends India Private Ltd.
5