Connecting Channels 1 To 4 (Amplifiers Produced Until 07/2011) - Hoellstern DELTA 6.2-DSP User Manual

6.1

Connecting Channels 1 to 4 (amplifiers produced until 07/2011)

Channels 3 and 4 are connected just like channels 1 and 2. Only the pictured wiring options are permitted. The wiring
options are printed on the back panel of the unit.
Alternatively, in bridge mode connector C2 pin 2+/ 1- or connector C4 pin 2+/ 1- can be used.
(Compatible with amplifiers produced from 07 / 2011)
Page 10 of 20