Summary of Contents for Electrovision NJ174 COTO CIRC
- Page 1 NJ174 OCTO CIRC 360 10mm LEDs in 3 colours Low power consumption Stand-alone or DMX operation Page 1...
-
Page 2: Before Use
IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the product including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately. -
Page 3: Product Safety
PRODUCT SAFETY This luminaire is for professional use only. It is the • owner's responsibility to ensure that all users are given adequate supervision and instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should be supervised to ensure that they do •... -
Page 4: Operation
OPERATION There are 6 modes of operation: Built-in programs, Auto- run, Slave, Sound, Static Colour and DMX. These are selected using the MODE pushbutton switch on the rear panel. BUILT−IN PROGRAMS mode: Press the MODE button repeatedly until is shown in the first two characters of the display. - Page 5 AUTO−RUN mode: In AUTO-RUN mode, the NJ174 goes through all the built-in programs in turn. To select AUTO−RUN Press the MODE button repeatedly until is shown on the AUTO display. In AUTO-RUN mode the LED chase speed, flash frequency, running speed and retention time can be set as above.
- Page 6 the fist slave to DMXin on the second etc. DO NOT select slave mode if it is the only luminaire that is operating. STATIC COLOUR mode. To select STATIC COLOUR mode, press the MODE button repeatedly until is shown in the display. CoLl- Then press Setup to select for red,...
- Page 7 4-channel mode operates similarly to 3-channel mode but with the addition of a master dimmer: The first channel sets the brightness of the red LEDs. The second channel sets the brightness of the green LEDs. The third channel sets the brightness of the blue LEDs. The fourth channel is the master dimmer.
- Page 8 26-channel mode operates similarly to 14-channel mode, except that the luminaire is divided into eight segments instead of four. The 1st, 2nd, and 3rd channels control the first segment, red, green and blue LEDs. The 4th, 5th and 6th channels control the second segment, red, green and blue LEDs.
- Page 9 45—53 Blue 54—62 Magenta 63—71 White 72—80 Program 02 81—89 Program 03 90—98 Program 04 99—107 Program 05 108—116 Program 06 117—125 Program 07 126—134 Program 08 135—143 Program 09 144—152 Program 10 153—161 Program 11 162—170 Program 12 171—179 Program 13 180—188 Program 14...
-
Page 10: Pat Testing
is displayed for 3-channel mode d-P1 is displayed for 4-channel mode d-P2 is displayed for 7-channel mode d-P6 is displayed for 14-channel mode, or d-P3 is displayed for 26-channel mode. d-P4 CLEANING Clean the outside of the luminaire with a soft damp cloth, with a drop of washing-up liquid. -
Page 11: Technical Specification
TECHNICAL SPECIFICATION Dimensions: 560×560×230 mm Weight: 6.4 kg Power supply: 230 V ˜ Power consumption: 45 W Operating current: 0.2 A Light source: 360 × 10 mm LED Colours: Beam Angle: 30° Mains input: IEC socket DMX Connections: 3-pin XLR Data+ pin 3 Data−... -
Page 12: Service / Warranty
If you have any problems with this product, please call our Help Desk on (0845) 459 4816. The help desk is open from 8 am until 1 pm, Monday to Friday. Electrovision Ltd., Lancots Lane, Sutton Oak, St. Helens, Merseyside.
Need help?
Do you have a question about the NJ174 COTO CIRC and is the answer not in the manual?
Questions and answers