First Release of netCAMit User’s Guide 1.0.0.1 December 12, 2007 Add the description of advanced network settings in Appendix B 1.0.0.2 October 30, 2008 Remove the description about Trigger In / Out connectors Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
1. Product Overview 1.1 Introduction netCAMit is a Plug & Play IP camera with a CMOS image sensor as well as built-in IP address, Ethernet Software Stacks and Protocols. Plug netCAMit directly to a RJ45 Ethernet port and watch the camera site from anywhere around the world. Connecting directly to Ethernet networks, netCAMit is a standalone digital network camera requiring no server at the camera site.
User’s Guide 2. Physical Description The following information contains the physical description of netCAMit camera. This includes the functions and the locations of each connector and indicator. The information provides useful reference when installing the product. Please familiarize yourself with netCAMit cameras.
Lens netCAMit box includes a standard 60° wide angle lens fixed to the camera. Other types of lens are also available upon request. Please note that different price may apply to different lenses.
The label sticker includes the serial number, camera ID and the firmware version of the camera. NOTE: If you have updated the camera firmware version, the firmware version information may no longer be valid. Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Ceiling Mount 3.1 Mounting Methods netCAMit comes with a desktop mount as the default purchase. If users would like to adopt wall & ceiling mount, please follow the steps below. Procedures of ceiling mounting are the same as the ones of wall mounting. The difference between these two mounting methods lies in the position of screwing.
Page 9
Before positioning the camera, please drill the wall at the desired position and screw the fixed board. Then, hang the camera on the fixed board along the slot of the bottom. Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
User’s Guide 4. Reset Default netCAMit provides “Reset Power” and “Reset Default” buttons that will be easy for users to reset the camera. The buttons locate in the back of the camera (See 1 and 2 of the figure below).
Weight: 100g (without the stand) Dimension of Main Body: 43 x 52 x 95 mm (without the stand) Note: Any specification is subject to change without any notice Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Internet Service Provider for the connection details and information). Setup the new router according to the manual comes with the new router. After your PC connected to the new router is able to connect to the Internet, please follow the Quick Installation Guide for netCAMit to set up your camera.
Page 13
7) Press Close button to close the “Local Area Connection Properties” window, and then follow eCAMit Deluxe User’s Guide in CD to install the eCAMit Deluxe software to view cameras. Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)