Sony DAV-F300 User Manual page 37

Symptom
The titles of folder/file/file name
are not displayed correctly.
A disc does not start playing
from the beginning.
The system starts playing the
disc automatically.
Playback stops automatically.
You cannot perform some
functions such as stop, search,
Slow-motion Play, or Repeat
Play.
Messages do not appear on the
TV screen in the language you
want.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed.
The subtitle cannot be turned off. • The DVD prohibits turning off subtitles.
The angles cannot be changed.
A disc cannot be ejected and
"LOCKED" appears in the front
panel display.
The system does not work
normally.
The Control for HDMI function
does not work.
Remedy
• The system can only display numbers and letters of the alphabets. Other
characters are displayed as [_].
• Program Play, Shuffle Play, or Repeat Play has been selected.
• Resume Play has been selected.
During stop, press x and then start playback (page 16).
• Method of stopping Program play.
Push x twice.
• Method of stopping Shuffle play.
Push x twice.
• The DVD features an auto playback function.
• Some discs may contain an auto pause signal. While playing such a disc, the
system stops playback at the auto pause signal.
• Depending on the disc, you may not be able to perform some of the operations
above. Refer to the operating instructions.
• In the Setup Display, select the desired language for the on-screen display in
[OSD Lang] under [General Setup Page] (page 28).
• Multilingual tracks are not recorded on the DVD being played.
• The DVD prohibits changing the language for the sound track.
• Multilingual subtitles are not recorded on the DVD being played.
• The DVD prohibits changing the subtitles.
• Multi-angles are not recorded on the DVD being played (page 14).
• The DVD prohibits changing the angles.
• Contact your Sony dealer or local authorized Sony service facility.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
• Set the [Control for HDMI] setting in [General Setup Page] to [On] (page 28).
• Make sure that the connected component is compatible with the [Control for
HDMI] function.
• Check that the AC power cord (mains lead) of the connected component is
connected securely.
• Check the connected component's setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set the [Control for HDMI] setting
in [General Setup Page] to [Off], then set the [Control for HDMI] setting in
[General Setup Page] to [On] (page 28).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 24).
37 GB