Advertisement
Quick Links
Thank you for choosing a Maxmatic Waste Disposal Unit
Further information and updates to these instructions are available at
www.max-appliances.co.uk
MAXMATIC
Domestic Food Waste Disposal Unit Operating and
Installation Manual for 5000 / 4000 / 4000C / 3000 / 2000
Please attach proof of purchase to this booklet
and keep it in a safe place with the de-jam key.
Don't forget to return the registration card within 14 days together
with a copy of your proof of purchase to receive your extensive
manufacturer's warranty, if not registered within 14 days of the
purchase date the statutory 12 month warranty will apply.
...............................................................
Your Serial Number
Aug 2013
Advertisement
Summary of Contents for Maxmatic 5000
- Page 1 MAXMATIC Domestic Food Waste Disposal Unit Operating and Installation Manual for 5000 / 4000 / 4000C / 3000 / 2000 Please attach proof of purchase to this booklet and keep it in a safe place with the de-jam key.
- Page 2 Contents How to use your Maxmatic waste disposal unit General Installation guide, plumbing, electrical Installation - 5000, 4000, 3000, 4000 Classic & 2000 Installation diagrams If your Disposer Stops Working & Warranties General Information NOTES...
- Page 3 Guarantee Thank You for choosing The greener option for your kitchen waste. Please complete the registration card within 14 days, return complete with a copy of proof of purchase to receive your extensive manufacturer’s warranty, if not registered within 14 days of purchase date the statutory 12 month warranty will apply.
- Page 4 PLEASE FOLD HERE AND SEAL MAX APPLIANCES LTD. FREEPOST SEA 11333 HASTINGS TN35 4BR...
- Page 5 5) When the grinding has fi nished, allow the unit to run for about 10 seconds. 6) Turn the Magnitop plug to the “DRAIN” position and turn off the water. The 5000 is also supplied with a Magnitube and can be used as a continuous feed unit as described below for the 4000.
-
Page 6: General Installation Information
GENERAL INSTALLATION INFORMATION PLUMBING A) The waste pipework must be installed to ensure that the unit drains completely. B) A ‘P’ or an ‘S’ trap must be fi tted. DO NOT USE A BOTTLE TRAP. C) The waste MUST not discharge over a gulley or drain grating. D) The waste pipes should not be less than 38mm in diameter. - Page 7 FOR 4000 CLASSIC AND 2000 Position the sink bush in sink waste outlet hole so that the MAXMATIC engraving is at the front of the sink i.e 6 o’clock. Check that it is fl ush or below the sink bowl surface and that it has a good seating.
- Page 8 Stage 1 Figure 2 Look inside the hopper to be sure the seals are located correctly. Machine Serial No Reverse Switch Stage 2 5000/4000/3000 Reset Button Reverse Switch Figure 1 on the base 4000 Classic opposite the & 2000 Figure 3...
-
Page 9: Warranty
If your Disposer Stops Working An overload switch protects your Maxmatic disposer. This will turn off the power in the event of a jam, overloading, or if the unit is left running for a prolonged period. 1) FIRST TURN OFF THE POWER SUPPLY. -
Page 10: General Information
Magnitop Magnitube Air or Wall Switch Grinding system Batch Feed Continuous Feed Continuous Feed 5000 4000 4000 Classic 3000 2000 Batch feed Waste is placed in the hopper and then a Magnitop plug is used to close off access and then turned to start the unit.