Advertisement
Quick Links
To:
42-5 DAEWON B/D, JAMWON-DONG, SEOCHO-KU, SEOUL, KOREA
TFT LCD MONITOR 17" With Sharpening Style
1. Introduction
With an LCD Panel Monitor using a TFT Color LCD, you can use SX1700 a substitution of general PC
Monitor because it can receive the R.G.B input of PC VGA Signal. SX1700 has OSD Function in order to
display the best quality of the screen according to VGA Cards' features. Besides, DVI, NTSC/PAL, S-Video
Signals are available by option, and Touch Screen is also available by customer's request, it can be usable
simultaneously with PS/2 Mouse.
Safety Precautions
The safety recommendations outlined in this section are to be read, understood and followed before
operating the product. Keep this information in a safe place for future reference. Failure to comply with any of
the following safety procedures could result in serious hazard.
A. Do not operate product for any purposes other than its intended use.
B. This product is intended for indoor use only.
C. Do not operate product if power cord is damaged in any way.
D. Do not insert object into openings.
E. Do not immerse product in water or permit liquids to spill inside.
F. Turn off power when attended or not in use unplug product before moving it or when it is not
in use for an extended period of time.
Note : These specifications are subject to change for up-date without notification
Jinyoung Contech Co., Ltd.
TEL : 82-2-517-0728
HOME PAGE :
SX1700
- With Touch Screen (Optional)
FAX : 82-2-3442-5029
http://www.jyct.com/
Issued Date :
Nov 07, 2003
Page :
14pages
USER'S MANUAL
Advertisement
Related Manuals for Jinyoung Contech SX1700
Summary of Contents for Jinyoung Contech SX1700
- Page 1 1. Introduction With an LCD Panel Monitor using a TFT Color LCD, you can use SX1700 a substitution of general PC Monitor because it can receive the R.G.B input of PC VGA Signal. SX1700 has OSD Function in order to display the best quality of the screen according to VGA Cards’...
-
Page 2: Specification
2. Specification ifications 2.1 LCD Monitor Spec Screen Size : 17.0” TFT Color LCD Active Area (H x W) : 337.92 ¡¿ 270.336 mm Supporting Resolutions : Full display by zooming out on VGA/SVGA/XGA/SXGA Driver Element : a-SI TFT active matrix Pixel Arrangement : RGB vertical stripe Display Mode : Normally White Surface treatment : Haze 25%, Anti-glare &... -
Page 3: Touchscreen Specifications
Frequency : Hor. 31.5 ~ 80 kHz, Ver. 56 ~ 75 Hz Compatibility of Vertical Frequency MODE Vertical Frequency (Hz) 640 x 480 60 / 72 / 75 800 x 600 56 / 60 / 72 / 75 1024 x 768 60 / 70 / 75 1280 x 1024 60 / 75... -
Page 4: Osd Functions
3. OSD Functions 3.1 OSD KEY * OSD Button : With pressing the button once, the OSD Screen is displayed. The button is used for closing Menu after adjusting each parameter value. The parameter values adjusted are automatically saved. * SEL Button :The SEL button is used when selecting Menu or exiting from SUB Menu. * RIGHT,LEFT Button - UP/RIGHT :Used for moving BAR position to the rightside from Main Menu or increasing parameter value from SUB Menu. - Page 5 : Automatic adjustment for sharpening screen image. With selecting ¡°YES ¡±,the text ¡°Auto Adjusting ¡± is displayed with black screen on the LCD. : Adjusts the black level of the backlight. : Adjusts the contrast ratio of the image. : Adjusts the screen position,ADC lock and phase.
- Page 6 - Horz. Position : Adjusts the screen position horizontally. - Vertical Position : Adjusts the screen position vertically. - Clock : Adjusts the value of clock per line. - Phase : Adjusts ADC Sample pixel Clock : Adjusts the gain of each RGB - Red : Adjusts the gain of Red.
- Page 7 - Green : Adjusts the gain of Green. - Blue : Adjusts the gain of Blue. - Factory Preset :Initializes setting values. - DOS/GFX :Selects DOS Mode only. - ON : 640 x 400 - OFF : 720 x 400...
- Page 8 - OSD Time : Selects OSD time out. - OSD H-Position : Adjusts OSD position horizontally. - OSD V-Position : Adjusts OSD position vertically. : Indicates display information about the system. : The adjusted parameter value is saved.
- Page 9 : Selects the mode the display.(optional) - Analog : Analog R.G.B Input Select - Digital : DVI(Digital Video Interface) Input Select - Video : NTSC/PAL Video input Select - S-Video : S-Video Input Select * Video Menu : Adjusts and saves the parameter value related with video function from Video Menu.
- Page 10 : Adjusts the combination of the Hue. : Adjusts the saturation of the screen. : Adjusts the screen position horizontally. : Adjusts the screen position vertically. 3.3 Warning Message No Sync Mode : If there is not Analog RGB or Video input signal,the message ¡°No Sync ¡± is displayed.
- Page 11 * Note : Please note that the OSD Menu is subjected to change without notice to improve its system. How to set up the best display - The center of the screen and the best images will be set automatically by executing Auto Config function in OSD Menu from Full Graphic Screen.
- Page 12 4. Connectors Power, Touch, DVI, S-Video, NTSC/PAL, DC Terminal is Optional...
- Page 13 5. Dimensions Monitor Dimensions VESA Standard ARM Mount.
- Page 14 Appendix 1. Packing List Ÿ LCD Monitor Ÿ LCD Monitor Manual Ÿ AC Power Inlet Cable Ÿ VGA Cable Ÿ Supporters, 4PCS Ÿ Touch Cable (Optional) Ÿ Touch Screen Install Diskette (Optional) Ÿ Touch Screen User’s Manual (Optional)