I. Working principle The water dispenser is a kind of device, which provides bottled drinking water (distilled water, pure water, mineral water, etc.) or daily life water treated through purification equipment to people for drinking, after being heated, cooled or at its original water temperature. Diversion and shunt functions: through the effect of atmospheric pressure, guide 3 gallons or 5 gallons of commercial water contained in a large bottle, through the bottle supporter, into their tanks respectively, to realize the purpose of auto provision and supplementation of water.
is fixed in the cold tank to determine water temperature. Compressor assembly(36): including PTC starter, condenser, etc., containing R134a cool-producing medium. Tap assembly(46,47): outlet of the water dispenser, made of edible grade plastic. Defrosting pan(37): receiving water overflowing out of the water glass. Separator(4);...
mounted. The tap is broken or tap silica gel Replace the tap. falls off. Hot water is not hot 96• bimetallic thermostat acts• wait for 5 • 10 minute • the self-reset Heating wire has poor contact or thermostat will •...
Attachment 3 Compressor Working Principle and Failure Analysis Brief outline of compressor cooling working principle The water dispenser compressor cooling system mainly includes compressor, condenser, filter, evaporator, capillary and other components. Drying filter Capillary Evaporator Condenser Compressor The water dispenser adopts a rotary compressor filled with cool-producing medium R134a. R134a gas is, by the compressor, compressed into high-pressure gas, goes into the condenser and then becomes high-pressure liquid.
Page 9
I. Methods for Compressor Maintenance The single hermetic compressor has three terminals on the body: R•primary coil or moving coil S•starting coil C•public poin Judgment of compressor exhaust pipe oil vent Generally, little oil discharges from a hermetic compressor. If oil is found to drip from the exhaust pipe continuously, it is shown that the compressor is discharging too much oil.
Page 10
If it moves slightly, that would be good, and otherwise replace the compressor.