Advertisement
Thank you for choosing Phase Technology
your purchase of our product. Phase Technology speakers are built to exacting standards and will provide many years of listening enjoyment.
Our speakers are the result of over five decades of designing and manufacturing. We hold many key patents in loudspeaker technology
including the soft-dome tweeter. Our mission, our passion is to constantly advance the art and science of accurate audio reproduction. Our
dedication insures your new speakers will accurately reproduce all the impact, detail and delicacy of today's digital technology.
Regardless of application, serious audiophile listening or home theater, we recommend that you take the time to read this manual thoroughly
before connecting speakers to your amplifier or receiver. In the highly unlikely event that you should experience a problem with set-up or
operation, please contact one of our authorized dealers for assistance, or contact us directly.
Phase Technology Corporation
8005 W. 110th St., Suite 208
Overland Park, KS 66210
855.663.5600 (Domestic)
+1.913.663.5600 (International)
913.663.3200 (Fax)
[GETTING STARTED AND PRECAUTIONARY NOTES]
For proper connection and therefore full enjoyment of your new Phase Technology
thoroughly, even if you are very familiar with installing speakers.
The Solaris
speaker is designed for indoor and outdoor playback of music and home theater sources. These omnidirectional speakers feature
®
powder-coated aluminum grilles and stainless steel fasteners that weather the elements and includes theft-resistant mounting hardware.
Speaker placement is very subjective. Each speaker should be positioned properly, relative to the listening area for good coverage.
[INSTALLING YOUR SOLARIS OMNIDIRECTIONAL OUTDOOR SPEAKER]
1. If needed for daisy chaining,
drill speaker base and install
second liquid-tight strain relief
(not included).
5. Attach signal wire to wire
leads. Use wire nuts provided.
For added water-proofing,
grease caps are recommended.
speakers. We know there are a wide variety of choices available today, and we sincerely appreciate
®
2. Attach in-ground/security
brackets to speaker base using
stainless steel bolts.
6. Set speaker enclosure on
speaker base. Use tamper-
resistant stainless steel screws
to attach speaker to base
(driver tip and screws provided).
speakers, we encourage you to read this owners' manual
®
3. Thread signal wire thru
liquid-tight strain relief and
tighten seal.
7. DONE!
4
4. Place speaker base into hole
in ground with the top rim of
the base at ground level. Back-
fill dirt into hole, packing firmly.
For added security, cement
security brackets into ground.
Advertisement
