Selecting The Film Advance Mode; Metering Modes; Evaluative Metering; Partial Metering - Canon EOS Rebel T2 Instruction Manual

EllSelecting the Film Advance Mode* w
Two film advance modes are provided: single-frame and continuous shmting
( M a x 3 t r a m e s p e r s e c ) .
Pre.ss the <El/$b button.
. Look at the LCD panel and press the
<E:/N)i> button
A single picture will be tiaktr wtpn you pffi
the shuner button all the my
Eal : Conti-nuous shooting
Continurus shots will be taks while you hold doM the shutter butttr all the way
,SE : Selttirer/RerDte mntrol
Metering Modes
The @mera haslhree metering modes: Evalmtive, panial, and centre-weighted
average metenng
fr--rffrn
Evaluative metering
fi-i-M.,l:|:l
This is the camera's standard metering mode suited for mGt
I Fls]eJ*!+:i:# I shooting including backlit conditions. Based on the subject's
fi-fFfr-fr
I position in the viewfinder, brightness, background, front or
back lighting conditions, etc., the camera always calculates the
proper exposure for the subject
Partial metering
This mode is set automatically when AE lock is used in a
Creative Zone mode lt is effective for backlit subiects when
there is a strong light behind the subject- The vieMinder centre
covering about 9 5% ot the viewfinder area is used for
metering The partial melering area is shoM on the left
Centrelueighted average metering
This is set automatically in the <M> mode The metering is
weighted at the centre and then averaged for the entire scene