Technical Specifications; Maintenance And Warranty - Hill Audio DMP-230 User Manual

USER MANUAL - DMP230 MEDIA PLAYER | FM TUNER
WARNING - HEALTH RISK
Excessive volume levels on headphones or other sound systems may cause hearing
damage. Always turn the volume control to minimum when you switch the unit on, and
avoid prolonged exposure to sound pressure levels exceeding 90dB.
Connections
The DMP230 uses the connection types shown below. The pin convention must be followed. Always
make sure to use good connectors and cables to ensure proper operation. Balanced connections are
to be preferred over unbalanced connections where applicable and feasible. Avoid unbalanced
connections exceeding 2m of cable length.
XLR male
XLR female
RCA
CABLE Types

Technical Specifications

AC IN ................................................................................................................................................................110-115V | 220-230V AC 50760 Hz
Dimensions...............................................................................................................................................................185.0×44.0×130.0mm WxHxD
Weight..................................................................................................................................................................................................................................0.9kg

Maintenance and warranty

While we have chosen the best components to make this product as rugged and reliable as possible, some parts in audio
products (potentiometers, faders, switches) are subject to wear which is a matter of operation cycles, and not of time.
While providing a full time-based warranty according to the country's of purchase requirements on the function of the
electronic circuitry, we hence have to limit the warranty on such electro-mechanical parts to 90 days from the date of
purchase.
In many cases, malfunction of electro-mechanical parts occurs due to dust contamination, which may require cleaning of
such parts. As the inside of such parts is not accessible, a common practice is to use cleaning fluids in the shape of
sprays. Please be reminded that many of such fluids contain chemicals which may wash away the dust but at the same
time corrode or damage contact surface and may cause cosmetic damage to other parts. We hence explicitly exclude
any claims for exchange of damaged part due to mechanical or chemical impact.
Structure
2
plug
3
side
1
1 1
plug
3 3
side
2
2
tip tip
sleeve sleeve
2
cable
3
side
1
1
cable
3
side
2
shield
red
black
2-conductor shielded cable
(for balanced connections)
Balanced Unbalanced
connection connection
red = 2 red = 2
black = 3 shield = 1+3
shield = 1
red = 2 red = 2
black = 3 shield = 1+3
shield = 1
red = tip red = tip
black = sleeve shield = sleeve
shield = uncon.
red
shield
1-conductor shielded cable
(for unbalanced connections)
PAGE 10