CDI computorq 3 Operation Manual
  1. Manuals
  2. Brands
  3. CDI Manuals
  4. Tools
  5. computorq 3
  6. Operation manual

CDI computorq 3 Operation Manual

Electronic torque wrench
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Enlarged version
FOR YOUR PERMANENT FILE
WRENCH MODEL NUMBER:
WRENCH SERIAL NUMBER:
For Warranty Claims, Contact CDI Torque Products
at (626) 965-0668.
LIMITED WARRANTY
The CDI Computorq 3 Electronic Torque Wrench
is backed by a one year warranty. This warranty
covers manufacturer defects and workmanship.
The warranty excludes misuse, abuse and normal
wear and tear. Exclusion is not allowed in some
states and may not apply. This warranty gives
you specific legal rights, and you may have other
rights, which vary from state to state.
IMPORTANT ENVIRONMENTAL NOTES:
1. This equipment may contain hazardous materials which can be
harmful to the environment.
2. Do not dispose of this equipment as municipal waste. Return it
to the distributor or a designated collection center.
Thank you for caring about our environment!
19220 SAN JOSE AVENUE • CITY OF INDUSTRY, CA 91748 • USA
(626) 965-0668
Find other fine torque products at WWW.CDITORQUE.COM
Form 20-1800-CDI
6/2010 Rev. N/C
Made in USA with US and Global Components
OPERATION MANUAL
cOMPUTORq 3
ELEcTRONIc
TORqUE WRENcH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the computorq 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for CDI computorq 3

  • Page 1 For Warranty Claims, Contact CDI Torque Products at (626) 965-0668. LIMITED WARRANTY The CDI Computorq 3 Electronic Torque Wrench is backed by a one year warranty. This warranty covers manufacturer defects and workmanship. The warranty excludes misuse, abuse and normal wear and tear.

  • Page 2: Safety Messages

    • Observe all equipment, system and 1. IMPORTANT - Service, repair and calibration are manufacturer’s warnings, cautions and to be performed by CDI Torque Products only. procedures when using this wrench. Calibration by the user is recorded in the wrench •...
  • Page 3 INTROdUcTION The Computorq 3 Electronic Torque Wrench digitally BATTERY - The Computorq 3 uses two (2) standard displays fastener torque specification settings, torque replaceable “CR123” lithium cells which provide more readings and peak hold measurements. than 80 hours of continuous operation. The current...

  • Page 4: Operator Instruction

    OPERATOR INSTRUcTION USE OF AdAPTERS, 100% 100% ExTENSIONS ANd UNIVERSALS 100% 100% 100% REPLACE BATTERY REPLACE BATTERY BATTERY UNITS OF UPDOWN UNIT REPLACE BATTERY REPLACE BATTERY REPLACE BATTERY INDICATOR GRAPH MEASURE PRESET SELECTION Anytime an adapter, extension or universal is used with a torque wrench in such a way that the fastener distance is different that the torque wrench square drive distance, an adjustment to the set torque is...

  • Page 5: Specifications

    DRIVE LENGTH WEIGHT - If the display shows “Err0” at power on, the 2401CI3 1/4” 15 in. 2.0 lbs. wrench is damaged and must be returned to CDI 1002CF3 3/8” 17 in. 2.2 lbs. Torque Products for repair. 2503CF3 1/2”...

  • Page 6: Conversion Table

    cERTIFIcATION USE OF ExTENSIONS ANd AdAPTERS This torque wrench as calibrated at the factory, is certified to meet the current ASME specification. When using an extension or adapter (increasing the Additionally, all wrenches are calibrated on a torque effective length of the torque wrench) the output standard traceable to the National Institute of torque value will change.

Table of Contents

Save PDF