Table of Contents
Advertisement
User Manual
For Card and Socket Services device drivers in the CONFIG.SYS file, please add the
ENABLE.EXE. The default parameters for the ENABLE.EXE program are INT=5, PORT=300
and MEM=D400. The following examples describe which instructions are needed for the
popular Card and Socket Services providers.
Phoenix PCM+ V3.0
DEVICE=C:\PCM3\CNFIGNAM.EXE /SETUP-DEFAULTS
DEVICE=C:\PCM3\PCMSS.EXE
DEVICE=C:\PCM3\PCMCS.EXE
DEVICE=C:\PCM3\PCMRMAN.SYS
DEVICE=C:\PCM3\PCMSCD.EXE
DEVICE=ENABLE.EXE
SystemSoft CardSoft V3.1
DEVICE=C:\CARDSOFT\SS365SL.EXE
DEVICE=C:\CARDSOFT\CS.EXE
DEVICE=C:\CARDSOFT\CSALLOC.EXE
DEVICE=ENABLE.EXE
Award Cardware V2.0
DEVICE=C:\CARDWARE\SSPCIC.EXE
DEVICE=C:\CARDWARE\PCCS.EXE
DEVICE=C:\CARDWARE\PCRM.EXE /AUTODETECT
DEVICE=ENABLE.EXE
[Note] Please do not use PCENABLE.EXE
AMI AMICard Manager
DEVICE=C:\AMI\SSSL.SYS
DEVICE=C:\AMI\AMICS.SYS
DEVICE=ENABLE.EXE
[Note] Please do not use PCBE.SYS
Databook CardTalk V3.02
DEVICE=C:\CARDTALK\TMB250.SYS /io:240
DEVICE=C:\CARDTALK\CTALKCS.EXE
DEVICE=C:\CARDTALK\CARDTALK.EXE /A /IOW=300-31F /MEMW=D000-D7FF
DEVICE=ENABLE.EXE
4
Advertisement
Table of Contents
