Related Manuals for Swarts Tools SW1890
Summary of Contents for Swarts Tools SW1890
- Page 1 INSTRUCTION BOOKLET AND WARRANTY INFORMATION 180MM Variable Speed Polisher Part No.SW1890 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE...
-
Page 2: Product Specifications
PRODUCT SPECIFICATIONS Voltage & Frequency 240V – 50HZ Input Power 1200W No load speed (RPM) 0 – 3,000/min. Dia. Of Disic 180mm Spindle thread Number 1,500 2,100 2,700 3,000 SAFETY INSTRUCTIONS WORK AREA ELECTRICAL SAFETY Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. -
Page 3: Personal Safety
PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating, a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. -
Page 4: Specific Safety Rules
SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to polisher safety rules. If you use this tool unsafely or incorrectly, you may suffer serious injury. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. - Page 5 FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. FUNCTIONAL CAUTION: FUNCTION DESCRIPTION FUNCTIONAL DESCRIPTION Shaft lock • Always be sure that the tool is switched off and CAUTION: 003432 DESCRIPTION...
- Page 6 • The speed adjusting dial can be turned only as far as 6 • adjusting function may no longer work. The speed adjusting dial can be turned only as far as 6 and back to 1. Do not force it past 6 or 1, or the speed and back to 1.
- Page 7 GUIDE TO POLISHING NOTE: Please remember to clean and degrease the item you wish to polish. Unclean/dirty/greasy material should be prepared properly before being polished. For polishing soft metals start at 6 on the step by step guide. There is no need to use the sisal mop with the Grey compound as they are very aggressive and used for Aluminium, Steel, Iron and Stainless steel.
- Page 8 WARRANTY The product is warranted to be free from defects in materials and workmanship under normal use and service for a period of 24 months from the date of sale. This warranty covers defective parts and workmanship provided that the product is shipped pre-paid to the seller within 24 months of purchase of goods.
Need help?
Do you have a question about the SW1890 and is the answer not in the manual?
Questions and answers