Table of Contents
Advertisement
Quick Links
Hi-Fi Bluetooth stereo headset
Thanks for choosing this fine headset from Telme2. We hope you will
enjoy the use. Please read this short User Guide before use.
Introduction
This comfortable headset uses the newest aptx technology providing you
with excellent stereo sound. You may enjoy this headset for listening to
music from a variety of Bluetooth sources, including the unique TosBlue-
X and TosBlue-X2 from Telme2. You may also make hands-free phone
calls from your smartphone via this headset, as the headset is equipped
with a microphone.
Warning
The headset must not be exposed to excessive heat or moisture as the
internal battery may be damaged.
Overview
1
Retractable headband
2
Previous track button
3
Next track button
4
LED in indicator – blue & red
5
Power On/OFF/Pairing button
6
Volume up button
7
Volume down button
8
Charging jack
1
User Guide
BH-X from Telme2
Advertisement
Table of Contents
Summary of Contents for Telme2 BH-X
- Page 1 User Guide Hi-Fi Bluetooth stereo headset BH-X from Telme2 Thanks for choosing this fine headset from Telme2. We hope you will enjoy the use. Please read this short User Guide before use. Introduction This comfortable headset uses the newest aptx technology providing you with excellent stereo sound.
- Page 2 The headset may be paired with a Bluetooth transmitting device with A2DP profile of your choice. Do this: - First you should set this BH-X headset in pairing mode by pressing the ON/OFF/Pairing button for 6 - 8 seconds or until the red and blue lights are alternately quickly flashing.
- Page 3 Press the ON/OFF/Pairing button for about 3-5 seconds or until the LED flashes quickly blue 4 times. Pairing with TosBlue-X One BH-X may be connected to TosBlue-X. The procedure is simple. Pairing for the first time Important: The pairing must take place within the 2 first minutes after power On of TosBlue units, and during the ”Pairing Search...
- Page 4 ON – and connection takes place automatically. Pairing with TosBlue-X2 Two BH-X headsets may be connected to a TosBlue-X2 units at the same time, so 2 persons may enjoy listening to a TV program simultaneously. To pair with TosBlue-X2 the first time...
-
Page 5: Adjusting The Volume
Important NOTE l: If the TosBlue unit is attached to a TV with included Bluetooth devices, the pairing process may be blocked. If this happens, enter the pairing process on the BH-X headset first; thereafter turn on the TV and the TosBlue unit – in this sequence. - Page 6 Low power warning When the red LED start flashing twice every 30 seconds and you hear a “Dong-Dong-Dong” sound, then your headset is ready for recharging. LED information Charging Steady red OFF/End Charging No light During pairing Rapid alternately flashing red and blue sequence Power ON sequence 4 rapid blue flashes...
- Page 7 a) Pair with the A2DP transmitter device b) Turn the A2DP device OFF c) Pair with the HFP device – the mobile phone d) Turn ON the A2DP transmitter device. This device will now pair automatically. NOTE: The devices will remember each other and will automatically reconnect next time they are turned ON.
Need help?
Do you have a question about the BH-X and is the answer not in the manual?
Questions and answers