Peavey PV 10AT Operating Manual page 13

PV10AT Front Panel
STEREO/MONO MODE SWITCH
58
In the mono position, the left and right buses are summed together after the faders. In this position, the L fader controls the level of the L bus,
and the R fader controls the level of the R bus, allowing you to use the L and R buses as groups. For example, all vocals could be panned L and
all instruments panned R. Then the L fader becomes the vocal master level and the R becomes the instruments master level.
MIC MUTE BUTTON AND LED
59
Depressing this button mutes all of the mic inputs channels (1-4) and the effects return. The media input channels are still "live". This allows
you to play break music, while muting all of the microphone inputs.
MAIN LEVEL FADERS
60
The Master Faders control the levels sent to the Main Left/Right outputs (34, 35). Best results are obtained when these controls are set near the
midpoint of the enclosed rectangle.
MAIN L+R METER ARRAY
61
Displays the level of the L and R outputs, or, when solo is active, displays the soloed channel(s). The top green LED corresponds to an output
level of +4dBu. The red LED is a clip warning indicator. The range of the meter is from -17 dBu to + 15 dBu.
MAIN SOLO LED
62
Lights when any solo button is pushed, to indicate that the solo system is active.