Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for X-Loupe MPG4_PLUS
Summary of Contents for X-Loupe MPG4_PLUS
- Page 1 Conceiver series MPG4_PLUS User Guide...
-
Page 3: Table Of Contents
Test-Shooting Before taking pictures of any important subject, please do the test-shooting to make sure the X-Loupe® is perfectly normal without any damage caused by shipping. In case of any problem, please contact your local distributor immediately... -
Page 4: Precautions
Doing so may cause malfunction or damage the image sensor of camera (CCD.) 3. Keep X-Loupe® away from water or other liquids. The usage of damped or drowned X-Loupe® could result in fire or electric shock. Immediately turn off the power of X-Loupe®... - Page 5 (water droplet) to form in the inside or on the surface of the equipment. After Reading, Keep the User Guide Handy for Future Reference X-Loupe® is protected by the following patents:(up to 2015/08 ) China Japan Taiwan Patent No.
-
Page 6: About "X-Loupe® Mightygetter (Mgp4_Plus)
About “X-Loupe® MightyGetter (MGP4_PLUS)” Thank you for your purchase of X-Loupe® MightyGetter ( MGP4_PLUS) to take Latent Print /fingerprints. This trailblazing tool is with built-in Dual LED Ring light in lens, sustained and stable high-brightness for feature, it provides the fixed working distance of shooting which... -
Page 7: Components
Components Front of Module Mount adapter Pogo pin (female) <Without Lens> On (Red dot) / Off switch LED Illumination Control Interchangeable 30X Object Lens for Latent print / Fingerprint Capture - 5 -... - Page 8 Components L-Square Ruler sticker With the ruler-side inward. (see page 10 for function and operating.) Battery Cassette Back of Module - 6 -...
-
Page 9: Light Source
Light Source Slide Switches 2. Lighting position: Core - Parallel lighting from inner Side - Focus lighting from side Lighting Switch Protection Filter See last page supplement for mounting and removing. 1. Lighting source: - White light - Functional light <Tips>... -
Page 10: Product Assembly
Canon NB-4L Li-ion battery.(fig. Caution: NB-4L Li-ion battery charging 4 hrs for the first time; 1.5 hours for general usage. (4) Turn on X-Loupe® module power. It will light up if handling is correct. Power Pogo pin (male) Battery Insert... -
Page 11: Mounting The Module With Camera
; If unable to solve, please immediately contact your distributor for assistance, do not try to modify X-Loupe® product by yourself in any way. Red Dot... -
Page 12: Steps In Positioning And Bonding Of L-Square Ruler
3 Steps in positioning and bonding of L-Square Ruler (1) Have the lens cleaning cloth placed on the table (to avoid a rub of camera LCD screen), figure 1 then set the assembled finished MGP4_PLUS upright on; the way holding camera as shown in Figure 1. - Page 13 Oblique Image Rectification If the image of L-Square Ruler is slanted, with the left point finger to hook into the Ruler while adjust the image. (The scale line of ruler should along the edge parallel to frame of screen). (6) Once the L-ruler is close to the screen frame which look like a double- L, with left hand to fix the position while re-erect the lens barrel as shown in Figure 5.
-
Page 14: Accessories Instructions For Use
4 Accessories instructions for use The following items, except 2 is recommended to be used, others for your choice whether to use, does not affect the overall function of MGP4_PLUS. Items Usage For the lens cover stay with the camera to prevent loss. ... -
Page 15: Attention/Warning For The Battery Charging
Attention/Warning for the Battery Charging Please use the included charger to charge the battery and go by following steps to charge the battery (1) Align the ▲marks on the battery and charger, then insert the battery by sliding it in 1 and down 2 . (2) Plug the battery charger into the power outlet, or attach the power cord to the battery charger and plug it into a power outlet then the Charging Signal will light on. -
Page 16: Notice And Preparation For Micro-Photography
It is useful while taking picture for a living thing such as insects and the earthworm. (3) Turn on X-Loupe® and camera. The camera lens should stretch out, and there will be image circle observed on the LCD monitor (Shown at left ), and it’s normal. -
Page 17: Camera Setup Before Using / While Using For Micro-Photography
Mode. (3) Set the Exposure Compensation to zero. (4) Set the White Balance to Day Light Mode while using the Light Source of X-Loupe®. (5) Set the Tone of an Image to Vivid. (6) Set the Metering System to Evaluative. - Page 18 Notice and Preparation for Micro-Photography The below setting are based on Panasonic Lumix DMC-FH 10 Zoom Button (1) Press the zoom bottom , until the cursor of zoom bar move to the current zoom position (5X optical zoom), the estimate will appear 1 m-∞. (2) After pressing 【...
- Page 19 (3) Press the 【 MENU / SET 】, there are menu item 【 Rec 】【 Motion Picture 】 【 Set up 】 . Have each item follow the function setting below. Motion Picture Picture Size 4:3 16M Rec Quality Sensitivity i ISO Continuous AF Depending on the conditions, but...
-
Page 20: Troubleshooting & Storage
Turn off the camera power to make the lens retract. Disassemble camera from the X-Loupe® module, and turn on the power of the camera again. The lens of the camera should be able to stretch out. b. If the problem is not solved, contact your local distributor; never try to fix the camera lens by force because it might void the warranty. - Page 21 And the changes in setting may lead to the function of micro photography is ineffectual. How to keep X-Loupe® (1) It is advised to use X-Loupe® in a moisture-free environment and keep away from water. (2) Keep X-Loupe® in the dry environment such as a dry box, and get some desiccants inside the storage case/ box.
- Page 22 - 20 -...
- Page 23 - 21 -...
- Page 24 - 22 -...
- Page 25 ‧ Supplement for Page 7 Protection Filter (for Blue Light) The magnetic slot-in filter is easy and quickly for you to drop it into the holder. Subtract the filter, as show, hold the barrel then quickly, vigorously but carefully to smack the barrel onto another palm, so that the filter will drop out. Keep the filter in a proper place while Not In Use.
- Page 26 MEMO - 24 -...
- Page 28 (Lumos Tech.) We reserve the trademark or other intellectual property rights. In case of any question, please contact your X-Loupe distributor, or e-mail x-loupe@lumos.com.tw ® MGP4E 081915...