Change Ambilight Settings; Use The Electronic Program Guide - Philips 52PFL8605D/93 User Manual

2
Press the Navigation buttons to select
[Setup], then press OK.
3
Select [TV settings], then press OK.
4
Select [Sound], then press OK.
5
Press to select a setting.
6
Press OK to access and adjust the setting.
The following sound settings can be
configured. Depending on the broadcast,
some sound settings may not be available.
[Smart sound]: Accesses pre-defined
•
smart sound settings.
[Reset]: Resets to factory default settings.
•
[Bass]: Adjusts the bass level.
•
• [Treble]: Adjusts the treble level.
[Surround]: Enables spatial sound.
•
[Headphones volume]: Adjusts
•
headphone volume.
[Auto volume leveling]: Automatically
•
reduces sudden volume changes, for
example, when switching channels.
[Balance]
• : Adjusts the balance of left and
right speakers.

Change Ambilight settings

You can adjust Ambilight color, brightness, and
mode to your taste.
1
When watching TV, press
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup], then press OK.
The [Setup] menu appears.
»
3
Select [TV settings] and press OK.
4
Select [Ambilight] and press OK.
5
Press to select a setting.
6
Press OK to access and adjust an
Ambilight setting.
The following Ambilight settings can be
configured:
(Home).
Use the Electronic Program
Guide
•
EPG is an on-screen guide available for digital
channels. EPG allows you to:
• [Ambilight]: Turns Ambilight on or
off.
[Dynamic]: Sets an Ambilight setting
•
between relaxed and dynamic
levels. This feature is only available
when Ambilight [Colour] is set to
[Dynamic].
[Brightness]: Changes the light
•
output from Ambilight.
[Colour]: Selects a predefined color
•
setting or a customized color setting.
• [Custom colour]: Allows fine tuning
of predefined colors.
[Separation]: Sets the difference
•
in Ambilight color level between
the sides of the TV. Setting this
feature off gives a dynamic, uniform
Ambilight color.
[TV switch off]: Selects how the TV
•
will be switched off.
[Lounge light mood]: Selects a
•
lounge light mode. This setting is
applied when the lounge light is
enabled in standby mode.
[Scenea lounge light]: Turns Scenea
•
lounge light on or off.
[Wall colour]: Selects a color
•
to match the wall color so that
Ambilight colors are adjusted to
display correctly.
Note
EPG is not available in all countries. If available,
you will receive either [Now]/[Next] or 8 days
EPG.
EN
15