Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for by-me VIMAR 20550
- Page 1 Instructions manual 01964 Module for CCTV system for monitor 20550...
-
Page 3: Table Of Contents
Activation for listening to audio channel ………………………………………………………………………………………… 10 Setting the volume for listening to audio channel ………………………………………………………………………………… 11 Setting the video parameters ……………………………………………………………………………………………………… 11 Integration of the CCTV interface with the By-me system ……………………………………………………………………… 13 Examples and installation diagrams ……………………………………………………………………………………………… 13 Standard CCTV diagrams ………………………………………………………………………………………………………… 13 Quick guide to using the CCTV interface …………………………………………………………………………………………... -
Page 4: Technical Characteristics
The device is equipped with 9 terminals, that enable connecting up with the other system appliances (power supply, video cameras, audio inputs, etc.). MADE PAT. PEND. ITALY A 1 M A A 2 V1 M V2 Figure 1 - CCTV interface module 01964. Figure 2 - Monitor VIMAR 20550. -
Page 5: Type Of System
Technical characteristics Type of system. The CCTV module 01964 (to be installed on monitor 20550) can be used with any type of video camera com- patible with the CVBS video signal (with output signal 1Vpp on 75Ω); audio inputs can be used for the levels of amplification of the microphones fitted on the devices, such as the recess-mounted video camera with two modules 20565 and 14565 and therefore using other types of audio sources does not assure the correct level of amplification for the voice channel. - Page 6 Technical characteristics Power supply 12 Vcc 20565 20550 + 01964 20565 Power supply 24 Vcc Figure 3 - CCTV System with two video inputs on multiplexer and VCR. Power supply 12 Vcc 20565 20550 + 01964 20565 20565 Multiplexer Power supply 24 Vcc 20565 Figure 4 - CCTV System with four video inputs on multiplexer and VCR.
-
Page 7: Main Technical Characteristics Of The Cctv System
Technical characteristics Main technical characteristics of the CCTV • Simple and flexible TVCC system for domestic use • CCTV interface for monitor 20550 with 2 independent audio/video inputs • Viewing and listening the single channel or automatic cyclical switching • Times for switching off and cyclical switching can be set via control panel 01960 •... - Page 8 Technical characteristics The removable connector is provided with 9 terminals divided according to the functions given in the following table: Terminal number Type Function Power Supply ( 18 Vdc..24 V dc) Power supply (GND) Imput Channel 1 audio signal input Audio signal input (GND) Imput Channel 2 audio signal input...
-
Page 9: Power Input
Technical characteristics Power input. The consumption of the CCTV interface module 01964, once inserted in the monitor 20550, depends on the cur- rent operating mode of the interface (standby, on call, red/green LED on, only video on, audio and video on, etc.). The mean values of the power input in the two typical modes of operation are the following: - minimum (on standby): 20 mA (supply voltage 18Vdc) - maximum (video and audio): 300 mA (supply voltage 18Vdc) -
Page 10: Functions Of The Cctv Interface And Configuration
Functions of the CCTV interface and configuration The monitor 20550, after adding module 01964, to all intents and purposes becomes a monitor for video surveil- lance and environmental listening. The main function of the device is to allow observation of environments in which video surveillance cameras are installed and if necessary listening of the audio signal from them (use the Vimar video cameras 20565 or 14565). -
Page 11: Turning On And Off
Functions of the CCTV interface and configuration For further information on using the CCTV interface, see the following chapter "CONFIGURATION OF THE CCTV INTERFACE” and the “QUICK GUIDE TO USING THE CCTV INTERFACE.” Turning on and off To switch on the module 01964 it is necessary to press, for at least 1 s, the ON/OFF button (button "A"); the monitor will switch on and show the video signal on the channel currently selected. -
Page 12: Cyclical Audio/Video Channel Switching
Functions of the CCTV interface and configuration Cyclical audio/video This type of function allows, when the monitor is on, cyclically viewing the video signals on channels 1 and 2. The time for viewing each single channel on cyclical switching is equal to 5 s (default value set by the factory). The user can enable or disable the cyclical switching by pressing the SECOND FUNCTION button at the same time (button "C") and the CHANNEL SELECTION button (button "B"): "C"+"B"... -
Page 13: Setting The Volume For Listening To Audio Channel
Functions of the CCTV interface and configuration Setting the volume for listening to audio channel The audio channel listening volume can be adjusted only if the "Audio channel listening activation" function has been enabled (green LED on). The setting, with the green LED on, is made with the buttons "H" and "I": button "H"... - Page 14 Functions of the CCTV interface and configuration Setting the colour. The colour adjustment is made with the trimmer on the inside top of the monitor 20550 (see figure 9); it is there- fore necessary to make the adjustment before installing the appliance on the wall. After installing the monitor on the wall with a flush mounting box it will no longer be possible to get to the trimmer except by again removing the it from the box.
-
Page 15: Integration Of The Cctv Interface With The By-Me System
If both modules 01964 and 01960 are present on the monitor 20550, the appliance will be in home automation mode and will switch onto CCTV mode when the user activates it via the navigation menus on the By-me home automation side. -
Page 16: Quick Guide To Using The Cctv Interface
CCTV and they are exclusively available on request from the Vimar sales network. WARNING: If there is also module 01960, the LEDs are also managed by the By-me control panel and their signals take on different meanings. If you are using the CCTV function (CCTV menu), the meaning of the LEDs is as stated in the above table while if the home automation system control panel is used (home automation system menu) see the technical documentation related to module 01960. -
Page 17: Installation Rules And Compliance With Regulations
Installation rules and compliance with regulations Installation regulations. Installation should be carried out observing current installation regulations for electrical systems in the country where the products are installed. WARNING: The environmental audio/video recording is regulated by Italian legislative decree D.lgs dated June 30th 2003, no. -
Page 18: Glossary
Glossary CCTV Set of devices that allow carrying out remote video surveillance of one or more places. Generally, when talking about CCTV we include the need, for reasons of safety, to record the video signal from indoor and/or outdoor television cameras. CCTV systems must comply with the prescriptions of specific regulations that govern and protect the privacy of the people transiting through the areas under video surveillance. - Page 20 Viale Vicenza, 14 I 36063 Marostica VI Tel. +39 0424 488 600 Fax +39 0424 488 709 907.1964A0.L.EN 01 0810 http://www.vimar.eu VIMAR - Marostica - Italy...